WhirlJet® Nozzle, 316 Stainless Steel, 4CF-SS150-45
Product Configuration
Material Composition:316 Stainless Steel
General Information
Description
- Hollow cone spray pattern with a circular impact area
- Large, unobstructed flow passages minimize clogging
- Good atomization of liquids at lower pressures – ideal for fluid cooling applications
- Removable caps for easy inspection and cleaning on some models
- Slope-bottom design models reduce the drilling effect of the fluid vortex in the fluid chamber and premature wear
- AX and BX nozzles form smaller drops; ideal for use in air washers and dust suppression applications
- CX, CF, CRC and D nozzles feature higher flow rates; ideal for use in larger, evaporative cooling spray ponds
- AP, LAP and LBP nozzles are constructed of polypropylene and feature excellent corrosion resistance at temperatures up to 160°F (71°C); patented center post design provides extended wear life of the nozzle
- Standard, wide and extra wide spray angles
Flow
As liquid enters the nozzle, it passes into a whirlchamber and begins to spin in a circle at high speed. The rotation forces the liquid away from the center toward the edges of the whirlchamber. This causes the liquid to exit the orifice in a hollow cone pattern. Some WhirlJet nozzles have a slope bottom in the whirlchamber that helps extend wear life.
Specification Summary
Inlet Connection Size
4 in
4 in
Inlet Connection Type
Flange
Flange
Liquid Flow Rate Range
366 - 2,162 l/min
98 - 567 gpm
Liquid Pressure Range
0.2 - 6 bar
3 - 100 psi
Material Composition
316 Stainless Steel
316 Stainless Steel
Relative Drop Size Range
1,000 - 5,000 µm
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Product Type
Nozzle
Nozzle
Product Downloads
Documents
Other
There was an error downloading your file
There was an error downloading your file
There was an error downloading your file
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
150-45
150-45
Inlet Connection Size
4 in
4 in
Inlet Connection Type
Flange
Flange
Liquid Flow Rate at Rated Pressure
567.812 l/min
150 gpm
Material Code
SS
SS
Material Composition
316 Stainless Steel
316 Stainless Steel
Model
CF
CF
Spray Angle at Rated Pressure
45°
45°
Design Feature
Is cast
Is cast
Product Type
Nozzle
Nozzle
Drop Sizes
Relative Drop Size Group
1,000 - 5,000 µm (Heavy Rain)
1,000 - 5,000 µm (Heavy Rain)
Performance
Spray Angle Range
45 - 52°
45 - 52°
Spray Angle
45° @ 0.5 bar, 49° @ 1.5 bar, 52° @ 4 bar
45° @ 7 psi, 49° @ 20 psi, 52° @ 80 psi
Physical
Inlet Centerline To Spray Orifice Height
23.495 cm
9.25 in
Inlet Diameter Nominal
7.938 cm
3.125 in
Inlet To Spray Orifice Length
11.191 cm
4.406 in
Spray Centerline Offset From Inlet Centerline
3.97 cm
1.563 in
Product Category
Brand
WhirlJet®
WhirlJet®
Spray Angle Catalog Code
Standard
Standard
Standard Feature
Equivalent Orifice Diameter
50.8 mm
2 in
Height
31.433 cm
12.375 in
Length
20.955 cm
8.25 in
Liquid Flow Rate Range
366 - 2,162 l/min
98 - 567 gpm
Liquid Pressure Range
0.2 - 6 bar
3 - 100 psi
Rated Pressure
0.483 bar
7 psi
Relative Drop Size Range
1,000 - 5,000 µm
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Weight
51.71 kg
114 oz