Name: TankJet® High Pressure Nozzle, Stainless Steel
Brand: TankJet®
SKU: YMD3-A-2250F

Performance

Configuration

Standard Feature

Product Category

The largest interior tank diameter (measured in feet or meters) for which a specific TankJet nozzle should be used.

Maximum Recommended Tank Diameter

Maximum Temperature

Operating Pressure Range

Minimum Tank Opening

Maximum Free Passage

Extension Length

Spray Coverage refers to the portion of the vessel to be cleaned. TankJet nozzles offering full 360° coverage clean all interior tank surfaces. For vessels with an open top, TankJet nozzles with 180° downward coverage are available. Other coverage patterns are also available.

Spray Coverage

Impact Group

The range of flow (typically measured in gallons per minute or liters per minute) published in our catalog for a given nozzle. 
> _The catalog offers flow rates only for selected operating pressures so greater flow may be possible at pressures not shown in the catalog._

Liquid Flow Rate Range

Standard hydraulic nozzles range in connection size from 1/8” threaded nozzles up to those with 12” flange connections. Larger connection sizes typically have larger flow rates but a wide variety of configurations are available to meet your application needs.

Inlet Connection Size

The position in which the tank cleaning nozzle may be inserted into the tank. All TankJet® tank cleaning products operate properly when hanging vertically downward. Some also operate when inserted upward, horizontally or at various angles into the tank.

Tank Mounting Options

Mounting flanges for TankJet nozzles are available in various sizes and types. Common flange types include ASME® Raised Face, Three-Prong, Sanitary Tri-Clamp and JIS.

Flange Options

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Operating Principle

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Material Composition

Model

Most nozzles are available with NPT or BSPT connections. Other threaded connections are available on select nozzles and additional connection types, such as flange and quick-connect, are also common. Some nozzles are also available with sanitary connections.

Inlet Connection Type

Recommended Strainer Mesh

TankJet motor-driven tank cleaners are available with air or electric motors. Some electric motors are explosion-proof.

Motor Type

We offer the _**“brand”**_ filter as a convenience because many Spraying Systems Co. nozzle brand names are recognized by customers around the world, such as VeeJet® flat spray nozzles and FullJet® full cone nozzles. Most of our nozzle brands are registered trademarks in the United States and in other countries around the world.

Brand

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

TankJet® High Pressure Motor-Driven Tank Cleaner, Tanks up to 30 ft., 360° spray coverage

This high pressure motorized unit provides trouble-free operation and reduces the need for dangerous and time-consuming manual tank cleaning. It is ideal for high-impact cleaning of chemical reactors, food and pharmaceutical processing tanks and other types of processing tanks.
* Dependable and durable motor-driven units provide consistent, high-impact cleaning to remove the most stubborn residues.
* Available air and electric motors rotate solid stream nozzles in three directions to efficiently cover the entire tank.
* Extension lengths available from 3.3 ft. (1 m) to 8.2 ft. (2.5 m).
* Wide range of nozzles available to fit specific applications.
* Operating pressure up to 4350 psi (300 bar).