DynaJet® Valve, 115880
Images are representative.
Images are representative. Products may differ in material or configuration.
General Information
Description
- Valve is normally closed and opens when solenoid is energized.
- Wetted materials include stainless steel and FKM.
- Use with most Diaphragm Check Valve equipped TeeJet nozzle bodies.
- 7 bar maximum spraying pressure at minimum voltage (12V or 24V).
- 2,3 LPM at 0,34 bar pressure drop and 3 LPM at 0,68 bar pressure drop.
- Offered in 12-Volt or 24-Volt DC version.
- 2-Pin MetriPack connector molded into body for a clean, weathertight electrical connection.
- Current draw of 0.9 AMPS (10 Watts) at 12-Volt DC.
- Can be ordered with power cable 98552-2 (refer to data sheet DS98552). DS98552 is valid for valves 115880, 116280, and 116950.
- Fluid feed should be filtered through a strainer with 80 mesh or finer screen.
