Air-Actuated Hydraulic Nozzle

Air-Actuated Hydraulic Nozzle with Flow up to 1,13 lpm

Air-Actuated Hydraulic Nozzle with Adjustable End Cap

Air-Actuated Hydraulic Nozzle, Plate Mounted (Gun Only)

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 1.59 l/min and Compact Block Design

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 5.68 l/min and Compact Block Design

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted (Gun Only)

Air-Actuated Hydraulic Nozzle with Flow up to 19 lpm

Air-Actuated Hydraulic Nozzle, Plate Mounted

Air-Actuated Hydraulic Nozzle with Flow up to 7,6 lpm and Extensions up to 36"

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted

Air-Actuated Hydraulic Nozzle with Flow up to 19 lpm and Recirculating Inlets

Air-Actuated Hydraulic Nozzle with Flow up to 7,6 lpm and Adjusting Screw for Shut-Off Needle

Air-Actuated Hydraulic Nozzle with Flow up to 2,3 lpm and Rear Knob for Locking Clean-Out Needle in Place

Air-Actuated Hydraulic Nozzle with Flow up to 2,3 lpm and Rear Knob for Locking Clean-Out Needle in Place, Lightweight Aluminum Body

Air-Actuated Hydraulic Nozzle with Flow up to 2,3 lpm and Rear Knob for Locking Clean-Out Needle in Place, Extensions up to 36"

Minimum Cylinder Air Pressure

Maximum Flow

Maximum Pressure

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Material Composition

Threaded nozzles are available with male (external) threads or female (internal) threads.

Inlet Connection Gender

Maximum Operating Speed

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Flow rates up to 2.3 lpm
* Nickel-plated brass or stainless steel construction with PTFE packing material
* Mounting hole with locking screw for easy rod mounting
* Rear knob locks the shut-off needle in place to prevent accidental discharge while changing spray tips
* Dual liquid inlets allow continuous liquid recirculation

Air-Actuated Hydraulic Nozzle with Flow up to 2,3 lpm and Rear Knob for Locking Clean-Out Needle in Place and Recirculating Inlets

Air-Actuated / Hydraulic Atomizing nozzles use only liquid pressure as the force for atomization, spraying at up to 180 cycles per minute. A variety of nozzle bodies are available for convenient mounting and positioning. Models are available with extensions and with a recirculating option to optimize performance. 

Air-Actuated Hydraulic Nozzle with Flow up to 2,3 lpm and Rear Knob for Locking Clean-Out Needle in Place and Recirculating Inlets, AA24AUA-8395

General Information

Description

Specification Summary

Alternative Models