UniJet® Deflected Flat Spray Nozzle Systems - Wide Angle

UniJet® Nozzle Systems - Medium Flow - TPU

UniJet® Flat Spray Nozzle Systems - Self-Aligning

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.
> _If drop size is critical to your application, contact us for specific information. For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Relative Drop Size Range

The range of operating pressures published in our catalog. 
> _The catalog offers flow data only for selected operating pressures. Certain nozzles may be able to operate outside the pressure range shown in the catalog. Consult your local Spraying Systems Co. representative to ensure safe operation._

Liquid Pressure Range

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Material Composition

A nozzle’s spray pattern is the shape the liquid forms after it emerges from the orifice. Nozzles are precision engineered to produce specific spray patterns such as full cone, flat spray, hollow cone and solid stream patterns. Different spray patterns are useful for different types of spray operations.
> _For more information about typical applications for various spray patterns, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Spray Pattern

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Designed for operations requiring higher impactZZZZZ* Save on nozzle replacement costs – bodies can be reused, only spray tips are replacedZZZZZ* Design allows easy tip change out – remove tips by unscrewing the retainer capZZZZZ* Flat spray nozzles provide an even edge fan type spray patternZZZZZ* Spray angles from 0° to 65°ZZZZZ* Uniform spray distribution across the entire spray pattern and flow rates from 1.5 to 64 lpmZZZZZ* Operating pressures from 20 to 200 bar –higher than standard tipsZZZZZ* Body assembly consists of high pressure nozzle body, strainer, tip gasket and high pressure tip retainer

UniJet® Flat Spray Nozzle Systems - High Pressure - EG

UniJet® flat spray tips and nozzle bodies provide the convenience of a nozzle that can be disassembled for maintenance or tip replacement. Standard and deflected flat spray patterns are available for a variety of cleaning and coating operations.

UniJet® Flat Spray Nozzle Systems - High Pressure - EG, EG

General Information

Description

Specification Summary

Alternative Models