Surface Finishing

TankJet motor-driven tank cleaners are available with air or electric motors. Some electric motors are explosion-proof.

Motor Type

Voltage

Input Power Type

Mounting/fixing bracket configuration of the E-Compact JAU body (no fixation, or a fixed bracket at 0°, 15° or 30°).

Fixing Type

Minimum Cylinder Air Pressure

Atomizing Air Flow Rate

Horizontal Spray Coverage Length Horizontal Spray

GunJet spray guns and accessories are available with various outlets, including NPT or BSPT threaded outlets, UniJet threaded outlets (11/16-16) and quick-connect outlets.

Outlet Connection Type

Drop Size

Maximum Liquid Discharge Pressure

Fungicide Contact

DSE Minimum Liquid Flow Rate

Price Type

Application Rate For Three Tips

DSE Calculation Model File Name

Cylinder Behavior

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Spray Angle

End Cap Options

Drop Size (Sauter Mean Diameter)

Maximum Free Passage

Check Valve Type

Height

Outer Clamp Sales Part Number

Flow Diagram Caption Title

Required Drillhole Diameter

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Check Valve Mount Side

The pressure (measured in bar) at which reference flow rate and spray angle data are taken.

Rated Pressure

Power

Core Number

Stator Type

JKI Certification Number

Number Of Trigger Signals

Steam Inlet Connection Gender

Air Flow Rate

Nozzle Size

Manifold Size

Different nozzle types are _**“rated”**_ at various pressures, depending on the function of the nozzle and the pressure at which a spray pattern is fully formed. The flow rate (typically measured in liters per minute) at the rated pressure (measured in bar) is highlighted in catalog performance tables and can serve as a reference point for comparing different nozzles.
> _Keep in mind when comparing nozzles of different types that the rated pressures may vary and will affect flow rate._

Liquid Flow Rate at Rated Pressure

DSE Calculation Enabled

E Dimension

Antenna Type

The spray angles produced by nozzles vary from 0° for solid stream nozzles up to 180° for select hollow cone nozzles. For ease of product searching, our catalog groups spray angles into “narrow” (typically < 50°), “standard” (50°-100°) and “wide” (> 100°).
> _**Important Note:** Spray angle range for each of the basic spray patterns (flat spray, full cone, hollow cone) varies, so Spray Angle Catalog Group is most useful when searching for nozzles within a single spray pattern._

Spray Angle Catalog Code

Orifice discs and cores are used in some UniJet® full cone and hollow cone nozzles to control spray characteristics. Each disc and core pairing provides an unique and different combination of flow rate, spray angle and spray pattern.

Orifice Disc Number And Core Number

Trigger Position

Liquid Flow Rate For Straight Stream Spray Pattern

The operating pressure as published in our catalog.

> _For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Liquid Pressure

Ball Material

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.
> _If drop size is critical to your application, contact us for specific information. For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Relative Drop Size Range

Fluid Side Spare Part Kit

Slot Size

Air Consumption

Provided for flat spray nozzles with elliptical orifices. It is the diameter of a circular orifice that would pass the same flow.

Equivalent Orifice Diameter

Number Of Speed Control Channels

Application Rate For Two Tips

A Dimension

Orifice Size

Shutoff Type for Position 3

Maximum Pressure

Max Vertical Throw For Straight Stream Spray Pattern

Discharge Outlet Connection Size

Approximate Spray Pattern Diameter

The range of flow (typically measured in liters per minute) published in our catalog for a given nozzle. 
> _The catalog offers flow rates only for selected operating pressures so greater flow may be possible at pressures not shown in the catalog._

Liquid Flow Rate Range

Shutoff Type for Position 2

The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Socket Size

Total Spray Coverage Diameter

Maximum Liquid Discharge Capacity

Formula Group

Water Inlet Connection Thread Type

Number Of PWM Channels

Number Of Set-ups

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.

The drop size ranges provided can be characterized as follows:
- 10 to 500 microns: very small drops
(comparable to fog)
- 100 to 500 microns: small drops
(comparable to light rain)
- 500 to 1000 microns: medium drops
(comparable to moderate rain)
- 1000 to 5000 microns: large drops
(comparable to heavy rain)

> _If drop size is critical to your application, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

> _For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Relative Drop Size Group

Spray Coverage refers to the portion of the vessel to be cleaned. TankJet nozzles offering full 360° coverage clean all interior tank surfaces. For vessels with an open top, TankJet nozzles with 180° downward coverage are available. Other coverage patterns are also available.

Spray Coverage

Formula

Circulation Rate

Maximum Flow

DSE Minimum Spray Height

Ball Diameter

The position in which the tank cleaning nozzle may be inserted into the tank. All TankJet® tank cleaning products operate properly when hanging vertically downward. Some also operate when inserted upward, horizontally or at various angles into the tank.

Tank Mounting Options

Bar Size

Boom Status

Square Tubing

Nozzle Type

DSE Default Spray Height

Operating Pressure Range

Inlet Diameter Nominal

Electrical Connection

Application

Model

Width

Weight

Maximum Temperature

Catalog Page Reference

Turret/Shutoff Type Code

Gearbox Type

Maximum Liquid Discharge Pressure Range

B Dimension

Threaded nozzles are available with male (external) threads or female (internal) threads.

Inlet Connection Gender

Opening Pressure

AIXR TeeJet® Air Induction XR Flat Spray

Turbo TeeJet® Wide Angle Flat Spray

Turbo TwinJet® Twin Flat Spray

Air Induction Turbo TwinJet® Twin Flat Spray

Turbo TeeJet® Induction Flat Spray

AccuPulse TwinJet

XR TeeJet® Extended Range Flat Spray

XRC TeeJet® Extended Range Flat Spray

AI TeeJet® Air Induction Flat Spray

AIC TeeJet® Air Induction Flat Spray

AI3070 Air Induction Dual Pattern Flat Spray

TTI TwinJet® Twin Flat Spray

TeeJet® Visiflo® Flat Spray

DG TeeJet® Drift Guard Flat Spray

DG TwinJet® Drift Guard Twin Flat Spray

TwinJet® Twin Flat Spray

FloodJet® Wide Angle Flat Spray

Turbo FloodJet® Wide Angle Flat Spray

Quick Turbo FloodJet® Wide Angle Flay Spray

TeeJet® TurfJet

FullJet® Wide Angle Full Cone Spray

TeeJet® Off-Center Flat Spray (Larger Capacities)

TeeJet® Off-Center Flat Spray (Smaller Capacities)

TeeJet® Double Outlet Flat Spray

The QuickJet® and UniJet® Nozzle Systems provide nozzle bodies with interchangeable spray tips. QuickJet bodies and tips are designated with “Q” as the first letter in the part number and offer quick-connect convenience with automatic spray pattern alignment. UniJet bodies and tips use a threaded retaining cap to complete the assembly. Both QuickJet and UniJet nozzles are available in a wide variety of spray patterns, flow rates and materials of construction.

Tip Type

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

TeeJet® Flat Spray

TeeJet® Flat Spray, TP

Product Type

Alternative Models