Name: SUVXE Air Atomizing Set-up
SKU: SUVXE2A-316SS

Configuration

Standard Feature

The range of flow (typically measured in liters per minute) published in our catalog for a given nozzle. 
> _The catalog offers flow rates only for selected operating pressures so greater flow may be possible at pressures not shown in the catalog._

Liquid Flow Rate Range

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Material Composition

Setup Type

Setup Mix Type

Air Cap Component

Fluid Cap Component

A nozzle’s spray pattern is the shape the liquid forms after it emerges from the orifice. Nozzles are precision engineered to produce specific spray patterns such as full cone, flat spray, hollow cone and solid stream patterns. Different spray patterns are useful for different types of spray operations.
> _For more information about typical applications for various spray patterns, download our [technical reference document](https://spray.widen.net/s/fhn6dz7tpz/cat75hyd_metric_tech-reference_a) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/en-eu/contact/find-a-representative)._

Spray Pattern

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

VX Air Atomizing Set-ups

* SUVXE spray setups deliver precise coverage and a superior finish with tight control of drop size - even when spraying viscous liquids and abrasive suspensions.\n* The liquid and compressed air or gas are mixed externally to completely atomize the spray.\n* Atomization can be controlled by varying the air pressure without changing liquid flow rate.\n* Independent control of fan air provides the ability to adjust the spray pattern without changing liquid flow rate.\n* Anti-bearding technology resists material buildup on the air cap and extends time between maintenance intervals\n* Indexing air caps with 30° increments ensure proper spray alignment\n* Ideal for use with a wide range of coatings and finishes\n*    Solvent- and water-based paints and lacquers\n*    Adhesives and glues\n*    Toners, stains and polyurethane top coats\n*    Epoxy primers, bases and clear coats\n*    Abrasive enamels, metallics or high-solids materials\n*    Food coatings, including frosting, cinnamon, cheese and other slurries\n*    Pharmaceutical table coatings

SUVXE Air Atomizing Set-up

Air-Actuated / Air Atomizing use compressed air for liquid atomization and also to control air cylinder operation for accurate intermittent spraying (up to 180 cycles per minute). A wide variety of nozzle bodies is available for convenient mounting and positioning. Models available with clean-out needles, shut-off needles, swivels and strainers to optimize performance. Liquid lines can be pressure-fed, siphon-fed or gravity-fed.

SUVXE Air Atomizing Set-up, SUVXE2A-316SS

General Information

Description

Specification Summary

Product Downloads

Documents

Specifications

Configuration

Standard Feature