The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Estimated Ready to Ship

Standard hydraulic nozzles range in connection size from 1/8” threaded nozzles up to those with 12” flange connections. Larger connection sizes typically have larger flow rates but a wide variety of configurations are available to meet your application needs.

Inlet Connection Size

The operating pressure as published in our catalog.

> _For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Pressure

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Materials

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

Most nozzles are available with NPT or BSPT connections. Other threaded connections are available on select nozzles and additional connection types, such as flange and quick-connect, are also common. Some nozzles are also available with sanitary connections.

Inlet Connection Type

Model

Outlet Connection Size

110 Pressure Relief Valve - Brass

110 Pressure Relief Valve - Aluminum

110 Pressure Relief Valve - Hardened Stainless Steel

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-nz-en-product-facets')/$metadata#docs(*)

QuickJet® Quick-Connect Nozzle Bodies - Large Capacity

BB Ball Check Valve

ProMax® Clip-Eyelet® Nozzle Body

Split-Eyelet Connector for Pipe Sizes up to 1"

CV Check Valve

Piston-Type Pressure Relief Valve with Guide Vane to Reduce Turbulence

HP-Eyelet Nozzle Bodies

UniJet® Nozzle Wall Mounting Adapter

Piston-Type Pressure Relief Valve

Split-Eyelet Connector for Pipe Sizes from 1-1/4" to 2"

Split-Eyelet Connector for Pipe Sizes 2-1/2" and larger

UniJet® Nozzle Bodies

Adjustable Ball Fitting

Clip-Eyelet® Nozzle Body

46550-ME Mini Tank Mixing Eductor

46550-AIE Air Induced Tank Mixing Eductor

AB Ball Check Valve

Piston-Type Pressure Relief Valve, EPDM O-ring and 302SS Spring

QuickJet® Quick-Connect Nozzle Bodies - Miniature

Diaphragm-Type Pressure Relief Valve

ProMax QuickJet Ball

Throttling Valve with Adjusting Cap for Flow Control

ProMax® QuickJet® Quick-Connect Nozzle Bodies

QuickJet® Quick-Connect Nozzle Bodies

Piston-Type Pressure Relief Valve with Removable Valve Bonnet

Piston-Type Pressure Relief Valve, FKM O-ring and 316SS Spring

UniJet® Nozzle Body - High Pressure

T-Style Liquid Line Strainer, 1/2" and 3/4" Inlet Connections

UniJet® Tip Strainer, 5053 type

UniJet® Tip Strainer, 8079 type

T-Style Liquid Line Strainer, 1/2" and 3/4" Inlet Connections with Mounting Holes

Multi-orifice, HP FogJet® Nozzles

T-Style Liquid Line Strainer, 1-1/4" to 2-1/2" Connections

UniJet® Tip Strainer, 6051 type

T-Style Liquid Line Strainer, 3/4" and 1" Connections

UniJet® Tip Strainer, 4067 type

UniJet® Tip Strainer with Check Valve

T-Style Liquid Line Strainer, 1-1/4" to 2-1/2" Connections, Self-Cleaning Version

T-Style Liquid Line Strainer, 3/4" and 1" Connections, Self-Cleaning Version

T-Style Liquid Line Strainer, 1-1/4" to 2-1/2" Connections with Mounting Holes

T-Style Liquid Line Strainer, 3/4" - 1-1/2" Connections with Mounting Holes and Removable Bottom Cap for Easy Cleaning

T-Style Liquid Line Strainer, 3/4" to 1-1/2" Connections with Mounting Holes, Self-Cleaning Version

T-Style Liquid Line Strainer, 1/4" to 2-1/2" Connections with Removable Bottom Plug for Easy Cleaning

High Pressure Line Strainer

UniJet® Tip Retainer

46550 Tank Mixing Eductor

UniJet® Diaphragm Check Valve Nozzle Body

UniJet® Split-Eyelet Nozzle Body

UniJet® Check Valve, 11750 type

UniJet® Nozzle Body, CP1322 type

UniJet® Nozzle Body, CP1321 type

Type TT TeeJet®  Nozzle Body

10742A Diaphragm Check Valve

Type T TeeJet®  Nozzle Body

UniJet® Nozzle Body, CP1323 type

UniJet® Nozzle Body, CP1324 type

12328 Diaphragm Check Valve

UniJet® Nozzle Adapter

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Pressure relief/regulating valves control line pressure and minimize liquid waste
* Valves return excess liquid back to the liquid source or to pump inlet

SprayFinder®

Model

Materials

Inlet Connection Type

Inlet Connection Size

Outlet Connection Size

Accessories