The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Inlet Connection Size

The operating pressure as published in our catalog.

> _For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Pressure

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Materials

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are available in many different configurations.
> _For more information about how various features might benefit your spray operation, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Design Feature

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

Most nozzles are available with NPT or BSPT connections. Other threaded connections are available on select nozzles and additional connection types, such as flange and quick-connect, are also common. Some nozzles are also available with sanitary connections.

Inlet Connection Type

Model

Automatic Air-Actuated Hydraulic Nozzle, Nickel-Plated Brass

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-nz-en-product-facets')/$metadata#docs(*)

FullJet® Full Cone Nozzles - Right Angle Type - Vaneless design

UniJet® Full Cone Nozzle Systems

Hydraulic Fine Spray Nozzles - One-piece design

FogJet® Wide Angle Fine Spray Nozzles - Cluster Type - Lower Flow

Hydraulic Fine Spray Nozzles - Integral Strainer - Wall Mount

SpiralJet® Hollow Cone Spiral Nozzles - Extra Large Free Passage

WashJet® Extra High Impact - Quick-Connect Spray Tips

FloodJet® Deflected Flat Spray Nozzles - Wide Angle Spray

UniJet® Hollow Cone Nozzle Systems - Fine Spray

Hydraulic Fine Spray Nozzles - Integral Strainer

Hydraulic Fine Spray Nozzles - Wide Angle Spray

FullJet® Full Cone Nozzles - Plastic - One-piece Design

WindJet® Round Spray Air Nozzle

WhirlJet® Hollow Cone Nozzles - Wide Angle Spray

FullJet® Full Cone Nozzles - Maximum Free Passage

UniJet® Nozzle Systems - Medium Flow - TPU

WashJet® High Impact Nozzles - Quick-Connect Spray Tips - QCMEG

Hydraulic Fine Spray Nozzles - Two-piece design

WhirlJet® Hollow Cone Nozzles

WhirlJet® Hollow Cone Nozzles - Cast - One-piece - Slope-bottom

WashJet® High Impact Nozzles - Quick-Connect Spray Tips - MEG-SSTC

SpiralJet® Full Cone Spiral Nozzles - Extra Large Free Passage

WhirlJet® Hollow Cone Nozzles - Cast - Two-piece

WhirlJet® Hollow Cone Nozzles - Inline Style - Nylon Body

FogJet® Wide Fine Spray Nozzles - Cluster Type

WhirlJet® Hollow Cone Nozzles - Inline Style

FlatJet® Deflected Flat Spray Nozzles - Narrow Angle Spray - High Impact

SpiralJet® Full Cone Spiral Nozzles - Large Free Passage

UniJet® Hollow Cone Nozzle Systems

UniJet® Hollow Cone Nozzle Systems - Fine Spray - SSTC Insert

WhirlJet® Hollow Cone Nozzles - Cast - One-piece

WashJet® Extra High Impact Flat Spray Nozzles

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.16 gpm (uses JJ Set-Ups),Max Speed 10,000 cpm

WindJet® Flat Fan Air Nozzle, ABS / PPS / Stainless Steel / Food Grade PVDF

Air-Actuated Hydraulic Nozzle

WindJet® Flat Fan Air Nozzle, Aluminum

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 45 ft., 360° Spray Coverage, Sanitary Design

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm

FullJet® Full Cone Nozzles - Removable Cap/Vane

Cloud-Sellers® Fluid-Driven Turbine Tank Cleaner, Tanks up to 100 ft., 360° Spray Coverage

Air-Actuated Air Atomizing Nozzle

TankJet® Stationary Tank Cleaning Nozzle, Tanks up to 10 ft.

FullJet® Full Cone Nozzles - One-piece Design

GunJet® Medium Pressure Spray Gun, Impact Resistant, Max Pressure 600 psi, Capacity 12 gpm

WindJet® Compact Flat Fan Air Nozzle, ABS

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm and Max Speed 15,000 cpm, For Use in Zone 1 Hazardous Areas

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzle, Tanks up to 5 ft., 180° Spray Coverage (Up or Down)

GunJet® Low Pressure Spray Gun, Max Pressure 200 psi

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzles, Tanks up to 18 ft., Sanitary Design, PTFE

Cloud-Sellers® Fluid-Driven Turbine Tank Cleaner, Tanks up to 80 ft., 180° Downward Spray Coverage

Air-Actuated Hydraulic Nozzle with Flow up to 0.3 gpm

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 5,000 cpm

Air-Actuated Hydraulic Nozzle with Adjustable End Cap

Air-Actuated Hydraulic Nozzle, Plate Mounted (Gun Only)

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzle, Tanks up to 5 ft.

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.42 gpm (uses JJ Set-Ups), Quick Change Fluid Module and Max Speed 2,000 cpm

TankJet® Motor-Driven Tank Cleaner, Tanks up to 100 ft., 360° spray coverage

TankJet® Stationary Tank Cleaning Nozzle, Tanks up to 20 ft.

TankJet® Motor-Driven Tank Cleaner, Tanks up to 40 ft., 360° spray coverage

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 0.42 gpm and Compact Block Design

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 1.6 gpm and Max Speed 5,000 cpm

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzle, up to 10 ft.

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi

GunJet® Low Pressure Spray Gun with Trigger-Activated Variable Spray Pattern, Max Pressure 250 psi, Capacity 10 gpm

GunJet® Low Pressure Spray Gun, Max Pressure 75 psi, Adjustable Metering Assembly, Capacity 1 to 16 ml per dose

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 50 ft., 360° Spray Coverage

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 1.5 gpm and Compact Block Design

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 1,000 cpm

TankJet® Motor-Driven Tank Cleaner, Tanks up to 16 ft., 360° spray coverage

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzle, Tanks up to 6.5 ft., Fits Very Small Tank Openings

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted (Gun Only)

TankJet® High Pressure Motor-Driven Tank Cleaner, Tanks up to 30 ft., 360° spray coverage

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm and Self-Aligning Dovetail Spray Tips

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi,  For use with Adhesives

Air-Actuated Hydraulic Nozzle with Flow up to 5 gpm

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzle, Tanks up to 3 ft., 180° or 360° Spray Coverage, PTFE

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm, Self-Aligning Dovetail Spray Tips and Side Liquid Inlet for Low Profile Mounting

GunJet® Medium Pressure Spray Gun, Max Pressure 1000 psi

Air-Actuated Hydraulic Nozzle, Plate Mounted

GunJet® Low Pressure Spray Gun with Trigger-Activated Variable Spray Pattern, Max Pressure 250 psi, Capacity 16 gpm

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm, Self-Aligning Dovetail Spray Tips and Liquid Recirculation

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 30 ft., 360° Spray Coverage

GunJet® Medium Pressure Spray Gun, Impact Resistant, Max Pressure 800 psi, Capacity 15 gpm

TankJet® 9-A Fluid-Driven Reactionary Force Tank Cleaning Nozzles, Tanks up to 6 ft.

Air-Actuated Hydraulic Nozzle with Flow up to 2 gpm and Extensions up to 36"

GunJet® Low Pressure Spray Gun with Rubber Cover, Max Pressure 150 psi, Capacity 10 to 22 gpm

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted

TankJet® Fluid-Driven Constant Speed Tank Cleaning Nozzle, Tanks up to 16 ft., 360° Spray Coverage

Medium Pressure Trigger Valve

Air-Actuated Hydraulic Nozzle with Flow up to 5 gpm and Recirculating Inlets

TriggerJet® 22650-PP Low Pressure Trigger Valve

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm and Jacketed Design for Temperature Control

TankJet® Fluid-Driven Constant Speed Tank Cleaning Nozzle, Tanks up to 16 ft., 360° Spray Coverage, Sanitary Design

TankJet® Fluid-Driven Constant Speed Tank Cleaning Nozzle, Tanks up to 16 ft., 65° to 260° Spray Coverage

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 25 ft., 360° Spray Coverage, Sanitary Design

PulsaJet® Mini Electrically-Actuated Hydraulic Nozzle, Compact Design

TankJet® Fluid-Driven Turbine Tank Cleaning Nozzle

Air-Actuated Air Atomizing Nozzle with Adjustable End Cap

Air-Actuated Hydraulic Nozzle with Flow up to 2 gpm and Adjusting Screw for Shut-Off Needle

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Flow rates up to 0.6 gpm (2.3 lpm)
* Nickel-plated brass or stainless steel construction with PTFE packing material
* Mounting hole with locking screw for easy rod mounting
* Rear knob locks the shut-off needle in place to prevent accidental discharge while changing spray tips
* Dual liquid inlets allow continuous liquid recirculation

Air-Actuated Hydraulic Nozzle with Flow up to 0.6 gpm and Rear Knob for Locking Clean-Out Needle in Place and Recirculating Inlets

SprayFinder®

Model

Inlet Connection Type

Inlet Connection Size

Design Feature

Applications