Found 147 products across 1 model
SprayFinder®
Operating Conditions
Liquid Flow Rate
≈
l/min
Liquid Pressure
=
bar
Specific Gravity
Spray Angle
Model
Materials
Relative Drop Size Group
Estimated Ready to Ship
Spray Angle at Rated Pressure
Hollow Cone Nozzles
Hollow cone nozzles produce small- to medium-sized drops forming a hollow cone pattern with a ring-shaped impact area. Large, unobstructed flow passages minimize clogging, allowing for uniform distribution at a wide range of flow rates and pressures, and effective atomization of liquids at lower pressures. The hollow cone spray pattern is ideal for cooling, washing, gas scrubbing / cooling, dust control and fire protection.
Based on your current criteria, all products belong to this model
Model
D Spray Tip
UniJet® Full And Hollow Cone Nozzle Systems - Disk-Type - Spray Tip
General information
- Quick-connect nozzles reduce maintenance time – bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Hollow cone spray pattern with a circular impact area
- Excellent atomization at relatively low pressures
- Spray angles: Standard – 13° to 114°, Wide – 130° to 140°
- Uniform spray distribution from 3.6 to 4,920 gph (13.2 to 17,760 lph)
- Operating pressures up to 400 psi (25 bar)
- Orifice inserts, cores and strainers are easily removed for inspection or cleaning
- TN versions provide very fine atomized sprays using liquid pressure alone; compressed air not required
- Spray angles: Standard – 43° to 91°
- Uniform spray distribution from .82 to 184 gph (3.1 to 701 lph)
- Operating pressures up to 2000 psi (140 bar)
D1-13HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|51°
D1-13Disc & Core UniJet® Nozzle, Brass
Brass|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 5 and 7 days|51°
D10-45HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|93°
D4-25HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|74°
D2-23Disc & Core UniJet® Nozzle, Brass
Brass|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 5 and 7 days|63°
D4-25Disc & Core UniJet® Nozzle, Brass
Brass|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 5 and 7 days|74°
D6-23HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|93°
D6-25Disc & Core UniJet® Nozzle, Brass
Brass|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 5 and 7 days|85°
D6-25HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|85°
D6-45HSSDisc & Core UniJet® Nozzle, Hardened Stainless Steel
Hardened Stainless Steel|100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)|Between 3 and 5 days|79°