The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Estimated Ready to Ship

Standard hydraulic nozzles range in connection size from 1/8” threaded nozzles up to those with 12” flange connections. Larger connection sizes typically have larger flow rates but a wide variety of configurations are available to meet your application needs.

Inlet Connection Size

The operating pressure as published in our catalog.

> _For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Pressure

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Materials

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

Most nozzles are available with NPT or BSPT connections. Other threaded connections are available on select nozzles and additional connection types, such as flange and quick-connect, are also common. Some nozzles are also available with sanitary connections.

Inlet Connection Type

Model

Outlet Connection Size

110 Pressure Relief Valve - Brass

110 Pressure Relief Valve - Aluminum

110 Pressure Relief Valve - Hardened Stainless Steel

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-nz-en-product-facets')/$metadata#docs(*)

QuickJet® Diaphragm Check Valve Nozzle Body

FoamJet

CV Check Valve

Heavy Edge Tungsten Carbide Tip

FloodJet® Deflected Flat Spray Nozzles - Wide Angle Spray

Piston-Type Pressure Relief Valve

WindJet® Round Spray Air Nozzle

Diaphragm Check Valve Nozzle Body

WashJet® High Impact Nozzles - Quick-Connect Spray Tips - MEG/WEG

VeeJet® Flat Spray And Solid Stream Nozzles - Medium Flow

UniJet® Nozzle Bodies

VeeJet

Adjustable Ball Fitting

VeeJet® Flat Spray Nozzles - Low Flow

Mini Quick VeeJet® Nozzle Systems - Low Flow

Piston-Type Pressure Relief Valve, EPDM O-ring and 302SS Spring

FlatJet® Deflected Flat Spray Nozzles - Narrow Angle Spray - High Impact

Quick VeeJet® Nozzle Systems

Diaphragm-Type Pressure Relief Valve

Throttling Valve with Adjusting Cap for Flow Control

VeeJet® Flat Spray Nozzles - Low Flow - Integral Strainer

TriggerJet

Piston-Type Pressure Relief Valve with Removable Valve Bonnet

WashJet® Extra High Impact Flat Spray Nozzles

One-Piece Flat Spray ShowerJet Nozzle

Black Liquor Nozzle

Trident™ Washdown Spray Gun

WindJet® Flat Fan Air Nozzle, ABS / PPS / Stainless Steel / Food Grade PVDF

WindJet® Air Amplifier

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 45 ft., 360° Spray Coverage, Sanitary Design

38171 Single Orifice

FullJet® Full Cone Nozzles - Removable Cap/Vane

Cloud-Sellers® Fluid-Driven Turbine Tank Cleaner, Tanks up to 100 ft., 360° Spray Coverage

FullJet® Full Cone Nozzles - One-piece Design

38170 Single Orifice with Strainer

Quick VeeJet® Spray Tip with Roll Pin

ShowerJet Disc-Type Nozzle

GunJet® Low Pressure Spray Gun, Max Pressure 200 psi

Cloud-Sellers® Fluid-Driven Turbine Tank Cleaner, Tanks up to 80 ft., 180° Downward Spray Coverage

TankJet® Fluid-Driven Reactionary Force Tank Cleaning Nozzles, Tanks up to 18 ft., Sanitary Design, PTFE

UniJet® Blow-Off Tips And Nozzle Assemblies

UltraStream® Single-Orifice Nozzle

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi

GunJet® Low Pressure Spray Gun with Trigger-Activated Variable Spray Pattern, Max Pressure 250 psi, Capacity 10 gpm

48461 Single Ruby Orifice

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 50 ft., 360° Spray Coverage

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi,  For use with Adhesives

72242 Single Ruby Orifice

GunJet® Medium Pressure Spray Gun, Max Pressure 1000 psi

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 30 ft., 360° Spray Coverage

GunJet® Low Pressure Spray Gun with Rubber Cover, Max Pressure 150 psi, Capacity 10 to 22 gpm

39610 Single Ruby Orifice Swivel

Shower Nozzle Lock Ring

Medium Pressure Trigger Valve

TriggerJet® 22650-PP Low Pressure Trigger Valve

TankJet® Fluid-Driven Constant Speed Tank Cleaning Nozzle, Tanks up to 16 ft., 360° Spray Coverage, Sanitary Design

TankJet® Fluid-Driven Turbine Tank Cleaner, Tanks up to 25 ft., 360° Spray Coverage, Sanitary Design

TankJet® Fluid-Driven Turbine Tank Cleaning Nozzle

56795-2 Dual Ruby Orifice

HX, HHX FullJet® Staked-Vane Full Cone Nozzle

FullJet® Full Cone Nozzles - Wide Angle Spray - Removable Cap/Vane

One-Piece, High Pressure ShowerJet Nozzle

58035-2 Dual Ruby Orifice

Low Pressure Trigger Valve with 1/4" or 3/8" (F) Outlet, Max Pressure 150 psi, Capacity 7 gpm

TankJet® Tank Cleaning Spray Balls

UltraStream® Dual Orifice Nozzle

GunJet® Low Pressure Spray Gun, Impact Resistant, Max Pressure 200 psi, Capacity 15 gpm

Low Pressure Trigger Valve with 11/16-16 UniJet® THD Outlet, Max Pressure 250 psi, Capacity 2 gpm

TankJet® 14 Fluid-Driven Turbine Tank Cleaner, Tanks up to 12 ft.

FullJet® Full Cone Nozzles - Wide Angle Spray - One-piece Design

UltraStream® Air Barrier Adapter

Low Pressure Trigger Valve with 1/4" (F) Outlet, Max Pressure 250 psi, Capacity 2 gpm

Low Pressure Trigger Valve with 11/16-16 UniJet® THD Outlet, Max Pressure 250 psi, Extra Long Trigger, Capacity 2 gpm

UltraStream® Trimming Feed Converter

GunJet® High Pressure Spray Gun, Max Pressure 1500 psi

Low Pressure Trigger Valve with 1/4" (F) Outlet, Max Pressure 250 psi, Extra Long Trigger, Capacity 2 gpm

UltraStream® Swivel Adapter

GunJet® High Pressure Spray Gun, Max Pressure 2500 psi

GunJet® High Pressure Spray Gun, Max Pressure 5000 psi

NeedleJet Solid Stream Nozzle

GunJet® High Pressure Spray Gun, Max Pressure 3000 psi

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Pressure relief/regulating valves control line pressure and minimize liquid waste
* Valves return excess liquid back to the liquid source or to pump inlet

SprayFinder®

Operating Conditions

Model

Materials

Inlet Connection Type

Inlet Connection Size

Outlet Connection Size

Industries