UniJet® Flat Spray Nozzle Systems - High Pressure - EG, EG
Images are representative.
Images are representative. Products may differ in material or configuration.
General Information
Description
- Designed for operations requiring higher impact
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced
- Design allows easy tip change out – remove tips by unscrewing the retainer cap
- Flat spray nozzles provide an even edge fan type spray pattern
- Spray angles from 0° to 65°
- Uniform spray distribution across the entire spray pattern and flow rates from .41 to 17.3 gpm (1.5 to 64 lpm)
- Operating pressures from 300 to 3000 psi (20 to 200 bar) –higher than standard tips
- Body assembly consists of high pressure nozzle body, strainer, tip gasket and high pressure tip retainer
Specification Summary
Liquid Pressure Range
2 - 200 bar
40 - 3,000 psi
Material Composition
Hardened Stainless Steel
Hardened Stainless Steel
Relative Drop Size Range
500 - 1,000 µm
500 - 1,000 µm
Spray Pattern
Flat Spray
Flat Spray
