Hollow Cone, UniJet® Nozzle, 303 Stainless Steel, T-SS12W
Product Configuration
Material Composition:303 Stainless Steel
General Information
Description
- Quick-connect nozzles reduce maintenance time – bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Hollow cone spray pattern with a circular impact area
- Excellent atomization at relatively low pressures
- Spray angles: Standard – 13° to 114°, Wide – 130° to 140°
- Uniform spray distribution from 3.6 to 4,920 gph (13.2 to 17,760 lph)
- Operating pressures up to 400 psi (25 bar)
- Orifice inserts, cores and strainers are easily removed for inspection or cleaning
- TN versions provide very fine atomized sprays using liquid pressure alone; compressed air not required
- Spray angles: Standard – 43° to 91°
- Uniform spray distribution from .82 to 184 gph (3.1 to 701 lph)
- Operating pressures up to 2000 psi (140 bar)
Flow
As the liquid passes through the nozzle, it is forced to pass through slots in the orifice. These slots make the liquid spin in a circle at a high speed as it exits the orifice, creating the hollow cone pattern.
Specification Summary
Inlet Connection Type
Quick-connect
Quick-connect
Liquid Flow Rate Range
23 - 72 l/h
6 - 19 gph
Liquid Pressure Range
0.4 - 6 bar
10 - 100 psi
Material Composition
303 Stainless Steel
303 Stainless Steel
Relative Drop Size Range
100 - 500 µm
100 - 500 µm
Spray Pattern
Hollow Cone
Hollow Cone
Product Type
Tip
Tip
Product Downloads
Documents
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
12W
12W
Inlet Connection Type
Quick-connect
Quick-connect
Liquid Flow Rate at Rated Pressure
0.76 l/min
0.2 gpm
Material Code
SS
SS
Material Composition
303 Stainless Steel
303 Stainless Steel
Model
T-W
T-W
Spray Angle at Rated Pressure
140°
140°
Tip Type
T-W
T-W
Product Type
Tip
Tip
Drop Sizes
Relative Drop Size Group
100 - 500 µm (Light Rain)
100 - 500 µm (Light Rain)
Performance
Spray Angle Range
136 - 140°
136 - 140°
Spray Angle
140° @ 1.5 bar, 140° @ 3 bar, 136° @ 6 bar
140° @ 20 psi, 140° @ 40 psi, 136° @ 80 psi
Physical
Number Of Inlet Openings
Two .044 x .029
Two .044 x .029
Product Category
Brand
UniJet®
UniJet®
Spray Angle Catalog Code
Wide
Wide
Standard Feature
Equivalent Orifice Diameter
1.981 mm
0.078 in
Liquid Flow Rate Range
23 - 72 l/h
6 - 19 gph
Liquid Pressure Range
0.4 - 6 bar
10 - 100 psi
Rated Pressure
2.76 bar
40 psi
Relative Drop Size Range
100 - 500 µm
100 - 500 µm
Spray Pattern
Hollow Cone
Hollow Cone