Full Cone, UniJet® Nozzle, 303 Stainless Steel, TG-SS0.3
Product Configuration
Material Composition:303 Stainless Steel
General Information
Description
- Quick-connect nozzles reduce maintenance time –bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Solid cone-shaped spray pattern with round impact area or cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones
- Spray angles: Standard – 43° to 91°, Wide – 112° to 120°
- Uniform spray distribution from .08 to 7.4 gpm (.3 to 28 lpm)
- Operating pressures up to 300 psi (20 bar)
Flow
As the liquid enters the nozzle, it passes through an internal strainer and into the slotted core where the swirling begins. The swirling continues as the liquid passes through a disc. The breakup of the liquid occurs as it exits the orifice, producing a well-defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern.
Specification Summary
Inlet Connection Type
Quick-connect
Quick-connect
Liquid Flow Rate Range
0.16 - 0.39 l/min
0.041 - 0.1 gpm
Liquid Pressure Range
1 - 10 bar
20 - 150 psi
Material Composition
303 Stainless Steel
303 Stainless Steel
Relative Drop Size Range
100 - 1,000 µm
100 - 1,000 µm
Spray Pattern
Full Cone
Full Cone
Product Type
Tip
Tip
Product Downloads
Documents
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
0.3
0.3
Inlet Connection Type
Quick-connect
Quick-connect
Liquid Flow Rate at Rated Pressure
0.114 l/min
0.03 gpm
Material Code
SS
SS
Material Composition
303 Stainless Steel
303 Stainless Steel
Model
TG
TG
Tip Type
TG
TG
Product Type
Tip
Tip
Drop Sizes
Relative Drop Size Group
100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)
100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)
Performance
Spray Angle Range
50 - 61°
50 - 61°
Spray Angle
50° @ 1.5 bar, 61° @ 6 bar
50° @ 20 psi, 61° @ 80 psi
Product Category
Brand
UniJet®
UniJet®
Spray Angle Catalog Code
Standard
Standard
Standard Feature
Equivalent Orifice Diameter
0.508 mm
0.02 in
Liquid Flow Rate Range
0.16 - 0.39 l/min
0.041 - 0.1 gpm
Liquid Pressure Range
1 - 10 bar
20 - 150 psi
Maximum Free Passage Diameter
0.406 mm
0.016 in
Rated Pressure
0.689 bar
10 psi
Relative Drop Size Range
100 - 1,000 µm
100 - 1,000 µm
Spray Pattern
Full Cone
Full Cone