Spraying Systems Company Logo

TankJet® Nozzle, TJ180-3-600-A21-V1B

Model:

Product Configuration

Gearbox Bearings:Oilite
Gearbox Type:Sealed
Gear Ratio:655:1
Inlet Stem:2.5 in. Quick-Disconnect (Male) and 2 in. BSPT (Female)
Nozzle Count:3
Nozzle Hub Drive:Pin
Nozzle Size:.250
O-Ring Type:Viton
Stator Type:Standard

General Information

Description

This unit provides concentrated, high-impact cleaning of hard-to-remove residues. It is ideal for open-top tanks, adhesive tanks, food processing tanks, paint tanks, petrochemical / chemical tanks, processing tanks and sludge / wastewater tanks.

  • Customizable — can be used for high-concentration chemical recirculation cleaning or low-pressure, high-volume cleaning.
  • Food-grade, oil-lubricated or flow-through gearbox designs are fluid-driven and ideal for open-top tanks; a built-in strainer minimizes clogging.
  • Global field support through dedicated sales engineers in more than 80 countries.
  • Nozzles rotate on multiple axes, creating a crisscross pattern to thoroughly clean tanks and remove the stickiest of residues.
  • Concentrated cleaning stream effectively cleans bottom and shadow areas of tanks, outperforming other fluid-driven tank cleaners.
  • All units are built-to-order and lightweight for easy portability.

Specification Summary

Impact Group
High Impact
Inlet Connection Size
2 in
Inlet Connection Type
Threaded (Female BSPT) + Quick-Disconnect (Male)
Liquid Flow Rate Range
114 - 1,136 l/min
Material Composition
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Maximum Recommended Tank Diameter
Up to 24.4 m
Maximum Temperature
121 °C
Nozzle Count
3
Operating Principle
Fluid-driven Turbine
Product Type
Nozzle
Spray Coverage
180°

Product Downloads

Documents

Other

Specifications

Configuration

Gear Ratio
655:1
Gearbox Bearings
Oilite
Gearbox Type
Sealed
Inlet Connection Size
2 in
Inlet Connection Type
Threaded (Female BSPT) + Quick-Disconnect (Male)
Inlet Stem
2.5 in. Quick-Disconnect (Male) and 2 in. BSPT (Female)
Material Composition
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Model
TJ180
Nozzle Count
3
Nozzle Hub Drive
Pin
Nozzle Size
.250
O-Ring Type
Viton
Product Type
Nozzle
Stator Type
Standard

Performance

Operating Pressure Range
2.8 - 24 bar

Product Category

Brand
TankJet®
Impact Group
High Impact

Standard Feature

Hub Connection Type
3 nozzle hub
Liquid Flow Rate Range
114 - 1,136 l/min
Maximum Free Passage
840 µm
Maximum Recommended Tank Diameter
Up to 24.4 m
Maximum Temperature
121 °C
Minimum Tank Opening
311 mm
Operating Principle
Fluid-driven Turbine
Recommended Strainer Mesh
20
Spray Coverage
180°
Tank Mounting Options
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward