Spraying Systems Company Logo

TankJet® Nozzle, TJ360-3-600-C13-E2

Model:

+ 9

Product Configuration

Gearbox Bearings:Rulon LR
Gearbox Type:Flow-Thru
Gear Ratio:655:1
Inlet Stem:2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Nozzle Count:3
Nozzle Hub Drive:Clutch
Nozzle Size:.313
O-Ring Type:Etylene Propylene
Stator Type:Standard

General Information

Description

This high-impact unit cleans hard-to-remove residues with great efficiency. It's ideal for blenders, breweries, food processing, petrochemical, pulp storage, processing, tanker trucks and wineries.

  • Provides consistent, high-impact, high-efficiency cleaning over the entire pressure range for short cycle times.
  • Can be used for two types of cleaning: high-concentration chemical recirculation cleaning and low-pressure, high-volume cleaning.
  • Choice of dual- or triple-nozzle fluid-driven hubs in food-grade, oil-lubricated or flow-through gearbox designs.
  • Nozzles rotate 360° in horizontal and vertical planes, creating a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues.
  • All units are built-to-order, lightweight for easy portability and compact to fit in small tank openings.
  • Standard clutch version permits easy nozzle hub rotation by hand for insertion and removal from tank; optional pin version for permanent or CIP installations; optional external, self-rinsing nozzles are available for both pin and clutch versions.
  • Built-in strainer minimizes clogging and extends wear life; user-serviceable for easy maintenance.

Specification Summary

Impact Group
High Impact
Inlet Connection Size
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Liquid Flow Rate Range
114 - 1,136 l/min
Material Composition
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Maximum Recommended Tank Diameter
Up to 30.5 m
Maximum Temperature
121 °C
Nozzle Count
3
Operating Principle
Fluid-driven Turbine
Product Type
Nozzle
Spray Coverage
360°

Product Downloads

Documents

Other

Specifications

Configuration

Gear Ratio
655:1
Gearbox Bearings
Rulon LR
Gearbox Type
Flow-Thru
Inlet Connection Size
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Inlet Stem
2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Material Composition
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Model
TJ360
Nozzle Count
3
Nozzle Hub Drive
Clutch
Nozzle Size
.313
O-Ring Type
Etylene Propylene
Product Type
Nozzle
Stator Type
Standard

Performance

Operating Pressure Range
2.8 - 24.1 bar

Product Category

Brand
TankJet®
Impact Group
High Impact

Standard Feature

Hub Connection Type
3 nozzle hub
Liquid Flow Rate Range
114 - 1,136 l/min
Maximum Free Passage
840 µm
Maximum Recommended Tank Diameter
Up to 30.5 m
Maximum Temperature
121 °C
Minimum Tank Opening
260 mm
Operating Principle
Fluid-driven Turbine
Recommended Strainer Mesh
20
Spray Coverage
360°
Tank Mounting Options
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward