E Dimension

Cylinder Behavior

Number of PWM Cycles

Answercode to a specific question

Outlet Connection Thread Type

The QuickJet® and UniJet® Nozzle Systems provide nozzle bodies with interchangeable spray tips. QuickJet bodies and tips are designated with “Q” as the first letter in the part number and offer quick-connect convenience with automatic spray pattern alignment. UniJet bodies and tips use a threaded retaining cap to complete the assembly. Both QuickJet and UniJet nozzles are available in a wide variety of spray patterns, flow rates and materials of construction.

Tip Type

Nozzle Hub

Drift Control

Application Rate For Two Tips

Catalog Page Reference

Outer Clamp Sales Part Number

Mesh Opening

Manifold Size

Insecticide Systemic

Maximum Pressure With Advanced AutoJet Controllers

Inlet Stem

Slot Width

Ball Material

DSE Calculation Enabled

Clamp Sales Part Number

Flow Diagram Caption Title

Length At Maximum Opening Height

Air Flow Rate

Flats

Model Type

Maximum Liquid Discharge Pressure

Products that are designated as "Food Contact" are constructed from materials that are compliant for food contact

Is Food Contact

Maximum Air Pressure

Check Valve Mount Side

Shutoff Type for Position 3

Liquid Flow Rate For Two Tips

Mesh size relates to the particle size that will be filtered by a strainer. Because the purpose of a liquid strainer is to prevent nozzle plugging, it’s important to choose a mesh size that will screen out particulates larger than the nozzle’s orifice will allow to pass. > _For help selecting the right strainer mesh size for your application, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Mesh Size

Different nozzle types are _**“rated”**_ at various pressures, depending on the function of the nozzle and the pressure at which a spray pattern is fully formed. The angle of the spray pattern as it emerges from the nozzle, when spraying at the rated pressure orifice, can serve as a reference point for comparing different nozzles.

Spray Angle at Rated Pressure

Electrical Connection

Fluid Nozzle Size

Orifice Cap Inlet Diameter

Motor Cables

Overflow Outlet Connection Size

Weight

Body Hex Size

Split Eyelet Style

DSE Maximum Spray Angle

Flow Diagram Caption Text

The range of operating pressures published in our catalog. 
> _The catalog offers flow data only for selected operating pressures. Certain nozzles may be able to operate outside the pressure range shown in the catalog. Consult your local Spraying Systems Co. representative to ensure safe operation._

Liquid Pressure Range

Discharge Outlet Connection Thread Type

Typical Pressure Drop

Pipe Size

Color

Air Consumption

Descriptive Product Type

The largest interior tank diameter (measured in feet or meters) for which a specific TankJet nozzle should be used.

Maximum Recommended Tank Diameter

Shutoff Type for Position 1

Sanitary Standard

Has Cleanout Needle

Input Power Type

INRAE Drift Reduction Rating

Inner Clamp Sales Part Number

Self-cleaning products are design to eliminate the need for special cleaning tools. Some self-cleaning products allow full drainage of sprayed liquid without disassembly while others provide internal brushes or other methods for keeping the product clean

Is Self Cleaning

Drop Size

Liquid Discharge Flow Rate Range

Tube Diameter

Voltage

Outlet Connection Gender

C Dimension

The nozzle height is set to ensure the optimal spray pattern overlap, which is necessary for uniform coverage based on the spacing of the nozzles across the spray boom.

Optimum Spray Height (Height @ Spacing)

Impact Group

PWM Voltage

Threaded nozzles are typically offered with tapered pipe threads. NPT and BSPT threads are the most common. Other thread types are available for selected nozzles.

Inlet Connection Thread Type

Compatible Needle Size

Screen Material

Electrical Side Spare Part Kit

Front Spray Angle at Rated Pressure

Number Of Inlet Openings

Horizontal Spray Coverage Length Horizontal Spray

Nozzle Count

Dense Spray Coverage Diameter

Application

Shutoff Type for Position 2

Detergent Inlet Connection Gender

The position in which the tank cleaning nozzle may be inserted into the tank. All TankJet® tank cleaning products operate properly when hanging vertically downward. Some also operate when inserted upward, horizontally or at various angles into the tank.

Tank Mounting Options

Catalog Section Reference

GunJet spray guns and accessories are available with various outlets, including NPT or BSPT threaded outlets, UniJet threaded outlets (11/16-16) and quick-connect outlets.

Outlet Connection Type

Provided for flat spray nozzles with elliptical orifices. It is the diameter of a circular orifice that would pass the same flow.

Equivalent Orifice Diameter

Orifice discs and cores are used in some UniJet® full cone and hollow cone nozzles to control spray characteristics. Each disc and core pairing provides an unique and different combination of flow rate, spray angle and spray pattern.

Orifice Disc Number And Core Number

Socket Hex Size

Spray Tips

Spray Centerline Offset From Inlet Centerline

DSE Default Spray Height

Stator Type

Slot Size

Model

Herbicide Soil Applied

Steam Inlet Connection Size

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.
> _If drop size is critical to your application, contact us for specific information. For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Relative Drop Size Range

Maximum Flow

The range of flow (typically measured in gallons per minute or liters per minute) published in our catalog for a given nozzle. 
> _The catalog offers flow rates only for selected operating pressures so greater flow may be possible at pressures not shown in the catalog._

Liquid Flow Rate Range

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Material Composition

Standard hydraulic nozzles range in connection size from 1/8” threaded nozzles up to those with 12” flange connections. Larger connection sizes typically have larger flow rates but a wide variety of configurations are available to meet your application needs.

Inlet Connection Size

Body Type

Formula

Air Atomzing Setup

1/4J Air Atomizing Assemblies And Components

1/2J Air Atomizing Assemblies And Components

1J Air Atomizing Assemblies And Components

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

1/8JJ Air Atomizing Assemblies And Components

Standard air atomizing nozzles mix liquid and compressed air to produce a finely atomized spray pattern. Hundreds of spray set-ups are available to produce a variety of spray patterns. Models are available with clean-out needles, shut-off needles, swivels and strainers to optimize performance. 

Standard Air Atomizing Nozzles

1/8JJ Air Atomizing Assemblies And Components, 1/8JJ

What type of product are you looking for?

General Information

Description

Downloads

Documents

Alternative Models