Spraying Systems Company Logo

WhirlJet® Nozzle, 316 Stainless Steel, 4CF-SS150

Model:

Product Configuration

Material Composition:316 Stainless Steel

General Information

Description

  • Hollow cone spray pattern with a circular impact area
  • Large, unobstructed flow passages minimize clogging
  • Good atomization of liquids at lower pressures – ideal for fluid cooling applications
  • Removable caps for easy inspection and cleaning on some models
  • Slope-bottom design models reduce the drilling effect of the fluid vortex in the fluid chamber and premature wear
  • AX and BX nozzles form smaller drops; ideal for use in air washers and dust suppression applications
  • CX, CF, CRC and D nozzles feature higher flow rates; ideal for use in larger, evaporative cooling spray ponds
  • AP, LAP and LBP nozzles are constructed of polypropylene and feature excellent corrosion resistance at temperatures up to 160°F (71°C); patented center post design provides extended wear life of the nozzle
  • Standard, wide and extra wide spray angles

Flow

As liquid enters the nozzle, it passes into a whirlchamber and begins to spin in a circle at high speed. The rotation forces the liquid away from the center toward the edges of the whirlchamber. This causes the liquid to exit the orifice in a hollow cone pattern. Some WhirlJet nozzles have a slope bottom in the whirlchamber that helps extend wear life.

Specification Summary

Inlet Connection Size
4 in
Inlet Connection Type
Flange
Liquid Flow Rate Range
366 - 2,162 l/min
Liquid Pressure Range
0.2 - 6 bar
Material Composition
316 Stainless Steel
Relative Drop Size Range
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Product Type
Nozzle

Product Downloads

Documents

Other

Product Performance

Liquid Flow Rate

Spray Angle

Specifications

Configuration

Capacity Size
150
Inlet Connection Size
4 in
Inlet Connection Type
Flange
Liquid Flow Rate at Rated Pressure
567.812 l/min
Material Code
SS
Material Composition
316 Stainless Steel
Model
CF
Spray Angle at Rated Pressure
66°
Design Feature
Is cast
Product Type
Nozzle

Drop Sizes

Relative Drop Size Group
1,000 - 5,000 µm (Heavy Rain)

Performance

Spray Angle Range
66 - 70°
Spray Angle
66° @ 0.5 bar, 67° @ 1.5 bar, 70° @ 4 bar

Physical

Inlet Centerline To Spray Orifice Height
23.495 cm
Inlet Diameter Nominal
7.938 cm
Inlet To Spray Orifice Length
11.191 cm
Spray Centerline Offset From Inlet Centerline
3.97 cm

Product Category

Brand
WhirlJet®
Spray Angle Catalog Code
Standard

Standard Feature

Equivalent Orifice Diameter
50.8 mm
Height
31.433 cm
Length
20.955 cm
Liquid Flow Rate Range
366 - 2,162 l/min
Liquid Pressure Range
0.2 - 6 bar
Rated Pressure
0.483 bar
Relative Drop Size Range
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Weight
51.71 kg