WhirlJet® Nozzle, Polypropylene, B9360-1/4AP-PP2
Product Configuration
Inlet Connection Size:1/4 in
Inlet Connection Thread Type:BSPT
Inlet Connection Type:Threaded (Female BSPT)
General Information
Description
- Hollow cone spray pattern with a circular impact area
- Large, unobstructed flow passages minimize clogging
- Good atomization of liquids at lower pressures – ideal for fluid cooling applications
- Removable caps for easy inspection and cleaning on some models
- Slope-bottom design models reduce the drilling effect of the fluid vortex in the fluid chamber and premature wear
- AX and BX nozzles form smaller drops; ideal for use in air washers and dust suppression applications
- CX, CF, CRC and D nozzles feature higher flow rates; ideal for use in larger, evaporative cooling spray ponds
- AP, LAP and LBP nozzles are constructed of polypropylene and feature excellent corrosion resistance at temperatures up to 160°F (71°C); patented center post design provides extended wear life of the nozzle
- Standard, wide and extra wide spray angles
Flow
As liquid enters the nozzle, it passes into a whirlchamber and begins to spin in a circle at high speed. The rotation forces the liquid away from the center toward the edges of the whirlchamber. This causes the liquid to exit the orifice in a hollow cone pattern. Some WhirlJet nozzles have a slope bottom in the whirlchamber that helps extend wear life.
Specification Summary
Inlet Connection Gender
Female
Female
Inlet Connection Size
1/4 in
1/4 in
Inlet Connection Thread Type
BSPT
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Threaded (Female BSPT)
Liquid Flow Rate Range
0.58 - 2.4 l/min
0.14 - 0.63 gpm
Liquid Pressure Range
0.4 - 6 bar
5 - 100 psi
Material Composition
Polypropylene
Polypropylene
Relative Drop Size Range
100 - 1,000 µm
100 - 1,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Product Type
Nozzle
Nozzle
Product Downloads
Documents
Other
There was an error downloading your file
There was an error downloading your file
There was an error downloading your file
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
2
2
Inlet Connection Gender
Female
Female
Inlet Connection Size
1/4 in
1/4 in
Inlet Connection Thread Type
BSPT
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Threaded (Female BSPT)
Liquid Flow Rate at Rated Pressure
0.76 l/min
0.2 gpm
Material Code
PP
PP
Material Composition
Polypropylene
Polypropylene
Model
AP
AP
Spray Angle at Rated Pressure
53°
53°
Product Type
Nozzle
Nozzle
Drop Sizes
Relative Drop Size Group
100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)
100 - 500 µm (Light Rain), 500 - 1,000 µm (Moderate Rain)
Performance
Spray Angle Range
53 - 80°
53 - 80°
Spray Angle
53° @ 0.7 bar, 70° @ 1.5 bar, 80° @ 6 bar
53° @ 10 psi, 70° @ 20 psi, 80° @ 60 psi
Physical
Inlet Centerline To Spray Orifice Height
2.2 cm
0.866 in
Inlet Diameter Nominal
0.198 cm
0.078 in
Inlet To Spray Orifice Length
2.54 cm
1 in
Spray Centerline Offset From Inlet Centerline
0.396 cm
0.156 in
Product Category
Brand
WhirlJet®
WhirlJet®
Spray Angle Catalog Code
Standard
Standard
Standard Feature
Equivalent Orifice Diameter
1.981 mm
0.078 in
Height
2.939 cm
1.157 in
Length
3.653 cm
1.438 in
Liquid Flow Rate Range
0.58 - 2.4 l/min
0.14 - 0.63 gpm
Liquid Pressure Range
0.4 - 6 bar
5 - 100 psi
Rated Pressure
0.689 bar
10 psi
Relative Drop Size Range
100 - 1,000 µm
100 - 1,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Weight
0.01 kg
0.4 oz