Tip Sales Part Number

Number of Outlets

Socket Size

Amperage

Number Of Slots

Tip Style Or Setup

Insecticide Contact

Outlet Connection Gender

Inlet Centerline To Spray Orifice Height

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

Power

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Liquid Flow Rate For Two Tips

End Cap Options

Bar Size

Extension Length

Spray nozzles are available in many different configurations.
> _For more information about how various features might benefit your spray operation, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Design Feature

Trigger Position

Body Sales Part Number

Volume

Application

DSE Maximum Liquid Flow Rate

Boom Status

Includes Harness

Discharge Outlet Connection Gender

Siphon Inlet Connection Gender

Flow Diagram Caption Title

DRD/TCT Drift Reduction Rating

Number of Items in Package

Threaded nozzles are typically offered with tapered pipe threads. NPT and BSPT threads are the most common. Other thread types are available for selected nozzles.

Inlet Connection Thread Type

Dense Spray Coverage Diameter

Needle Type

Orifice Size

Connector Type

Setup Mix Type

Inner Clamp Sales Part Number

Stator Type

Maximum Liquid Discharge Temperature

Overflow Outlet Connection Gender

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

Manifold Size

Maximum Temperature

Gearbox Type

Sanitary Standard

Square Tubing

Slot Size

Inlet Steam Pressure Range

Current

Herbicide Systemic

Inlet To Spray Orifice Length

Maximum Spray Distance Horizontal Spray

Nozzle Type

Liquid Flow Rate For Straight Stream Spray Pattern

Fluid Cap Component

Application Rate For Two Tips

Model Type

Hub Connection Type

Tip Style Notes

DSE Minimum Liquid Pressure

Inlet Stem

DSE Maximum Spray Height

Model

Power Cable

Cable Length

Minimum Tank Opening

Steam Inlet Connection Size

Minimum Cylinder Air Pressure

Fluid Nozzle Size

Flats

JKI Drift Reduction Rating

Application Rate

Spray Tips

Maximum Transverse Spray Coverage Width Horizontal Spray

Body Hex Size

Extension Options

Fertilizer Banding

Fan Air Flow Rate

The largest interior tank diameter (measured in feet or meters) for which a specific TankJet nozzle should be used.

Maximum Recommended Tank Diameter

Bushing and O-Ring Material

Opening Pressure

Catalog Page Reference

Drop Size

Number Of Inlet Openings

Motor Cables

Formula

Typical Pressure Drop

DSE Default Spray Angle

Maximum Liquid Discharge Pressure

Orifice Type

DSE Maximum Spray Angle

Minimum Pressure

Fertilizer Directed

Inlet Diameter Nominal

Nozzle Hub

### Operating ConditionsLiquid Flow Rate is the volume of liquid passing through a nozzle (also called the nozzle’s capacity) and is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed. For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf).The Liquid Pressure is the operating pressure as published in our catalog. For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative).Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. Alternatively, if you don't know the specific gravity you may select the Liquid Type from a list of commonly-sprayed liquids and temperatures. Liquid Type is the type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative).The Spray Angle is the angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle. For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf).

Operating Conditions

Max Horizontal Throw For Straight Stream Spray Pattern

Fluid Cap Part Number

Side Spray Angle at Rated Pressure

Turf Application

VMAU Air Atomizing Assemblies And Components

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

VAA/VAU Air Atomizing Assemblies And Components

Variable spray nozzles provide uniform spray distribution, even when spraying viscous liquids. Independent control of liquid, atomzing air and fan air pressures make it possible to fine-tune flow rate, drop size, spray distribution and coverage.

Variable Spray Nozzles

VAA/VAU Air Atomizing Assemblies And Components, VAA/VAU

What type of product are you looking for?

General Information

Description

Downloads

Documents

Alternative Models