TankJet® Nozzle, TJ180-3-604-H21-V1
Product Configuration
Gearbox Bearings:Oilite
Gearbox Type:Sealed
Gear Ratio:655:1
Inlet Stem:2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Nozzle Count:3
Nozzle Hub Drive:Pin
Nozzle Size:.625
O-Ring Type:Viton
Stator Type:High Volume
General Information
Description
This unit provides concentrated, high-impact cleaning of hard-to-remove residues. It is ideal for open-top tanks, adhesive tanks, food processing tanks, paint tanks, petrochemical / chemical tanks, processing tanks and sludge / wastewater tanks.
- Customizable — can be used for high-concentration chemical recirculation cleaning or low-pressure, high-volume cleaning.
- Food-grade, oil-lubricated or flow-through gearbox designs are fluid-driven and ideal for open-top tanks; a built-in strainer minimizes clogging.
- Global field support through dedicated sales engineers in more than 80 countries.
- Nozzles rotate on multiple axes, creating a crisscross pattern to thoroughly clean tanks and remove the stickiest of residues.
- Concentrated cleaning stream effectively cleans bottom and shadow areas of tanks, outperforming other fluid-driven tank cleaners.
- All units are built-to-order and lightweight for easy portability.
Specification Summary
Impact Group
High Impact
High Impact
Inlet Connection Size
2 in
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Threaded (Female NPT) + Quick-Disconnect (Male)
Liquid Flow Rate Range
114 - 1,136 l/min
30 - 300 gpm
Material Composition
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Maximum Recommended Tank Diameter
Up to 24.4 m
Up to 80 ft
Maximum Temperature
121 °C
250 °F
Nozzle Count
3
3
Operating Principle
Fluid-driven Turbine
Fluid-driven Turbine
Product Type
Nozzle
Nozzle
Spray Coverage
180°
180°
Product Downloads
Documents
Other
There was an error downloading your file
There was an error downloading your file
There was an error downloading your file
Specifications
Configuration
Gear Ratio
655:1
655:1
Gearbox Bearings
Oilite
Oilite
Gearbox Type
Sealed
Sealed
Inlet Connection Size
2 in
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Threaded (Female NPT) + Quick-Disconnect (Male)
Inlet Stem
2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Material Composition
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Gears – 17-4PH stainless steel, O-rings – self-lubricating EPDM or Viton, Seals – high-performance spring-energized PTFE, Gear shaft bearing system – PTFE or oilite bearing, All other metallurgy – 316 stainless steel or Viton
Model
TJ180
TJ180
Nozzle Count
3
3
Nozzle Hub Drive
Pin
Pin
Nozzle Size
.625
.625
O-Ring Type
Viton
Viton
Product Type
Nozzle
Nozzle
Stator Type
High Volume
High Volume
Performance
Operating Pressure Range
2.8 - 24.1 bar
40 - 350 psi
Product Category
Brand
TankJet®
TankJet®
Impact Group
High Impact
High Impact
Standard Feature
Hub Connection Type
3 nozzle hub
3 nozzle hub
Liquid Flow Rate Range
114 - 1,136 l/min
30 - 300 gpm
Maximum Free Passage
840 µm
840 µm
Maximum Recommended Tank Diameter
Up to 24.4 m
Up to 80 ft
Maximum Temperature
121 °C
250 °F
Minimum Tank Opening
311 mm
12.25 in
Operating Principle
Fluid-driven Turbine
Fluid-driven Turbine
Recommended Strainer Mesh
20
20
Spray Coverage
180°
180°
Tank Mounting Options
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward