UniJet® Full And Hollow Cone Nozzle Systems - Disk-Type - Spray Tip, D Spray Tip
Images are representative.
Images are representative. Products may differ in material or configuration.
General Information
Description
- Quick-connect nozzles reduce maintenance time – bodies remain on pipe/header
- Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced; tips fit on male or female bodies
- Hollow cone spray pattern with a circular impact area
- Excellent atomization at relatively low pressures
- Spray angles: Standard – 13° to 114°, Wide – 130° to 140°
- Uniform spray distribution from 3.6 to 4,920 gph (13.2 to 17,760 lph)
- Operating pressures up to 400 psi (25 bar)
- Orifice inserts, cores and strainers are easily removed for inspection or cleaning
- TN versions provide very fine atomized sprays using liquid pressure alone; compressed air not required
- Spray angles: Standard – 43° to 91°
- Uniform spray distribution from .82 to 184 gph (3.1 to 701 lph)
- Operating pressures up to 2000 psi (140 bar)
Specification Summary
Relative Drop Size Range
100 - 1,000 µm
100 - 1,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
