The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Inlet Connection Size

The operating pressure as published in our catalog.

> _For more information on how liquid pressure affects spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Pressure

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Materials

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

Most nozzles are available with NPT or BSPT connections. Other threaded connections are available on select nozzles and additional connection types, such as flange and quick-connect, are also common. Some nozzles are also available with sanitary connections.

Inlet Connection Type

Model

Automatic Air-Actuated Air Atomizing Nozzle, Nickel-Plated Brass

Automatic Air-Actuated Air Atomizing Nozzle, 303 Stainless Steel

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-us-en-product-facets')/$metadata#docs(*)

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.16 gpm (uses JJ Set-Ups),Max Speed 10,000 cpm

Air-Actuated Hydraulic Nozzle

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm

Air-Actuated Air Atomizing Nozzle

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm and Max Speed 15,000 cpm, For Use in Zone 1 Hazardous Areas

Air-Actuated Hydraulic Nozzle with Flow up to 0.3 gpm

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 5,000 cpm

Air-Actuated Hydraulic Nozzle with Adjustable End Cap

Air-Actuated Hydraulic Nozzle, Plate Mounted (Gun Only)

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.42 gpm (uses JJ Set-Ups), Quick Change Fluid Module and Max Speed 2,000 cpm

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 0.42 gpm and Compact Block Design

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 1.6 gpm and Max Speed 5,000 cpm

Air-Actuated Hydraulic Nozzle with 1/8" Inlet, Flow up to 1.5 gpm and Compact Block Design

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 1,000 cpm

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted (Gun Only)

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm and Self-Aligning Dovetail Spray Tips

Air-Actuated Hydraulic Nozzle with Flow up to 5 gpm

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm, Self-Aligning Dovetail Spray Tips and Side Liquid Inlet for Low Profile Mounting

Air-Actuated Hydraulic Nozzle, Plate Mounted

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm, Self-Aligning Dovetail Spray Tips and Liquid Recirculation

Air-Actuated Hydraulic Nozzle with Flow up to 2 gpm and Extensions up to 36"

Air-Actuated Hydraulic Nozzle with Adjustable End Cap, Plate Mounted

Air-Actuated Hydraulic Nozzle with Flow up to 5 gpm and Recirculating Inlets

PulsaJet® Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm, Max Speed 15,000 cpm and Jacketed Design for Temperature Control

PulsaJet® Mini Electrically-Actuated Hydraulic Nozzle, Compact Design

Air-Actuated Air Atomizing Nozzle with Adjustable End Cap

Air-Actuated Hydraulic Nozzle with Flow up to 2 gpm and Adjusting Screw for Shut-Off Needle

Air-Actuated Air Atomizing Nozzle with Metering End Cap

Electrically-Actuated Hydraulic Nozzle with Flow up to 0.47 gpm and Max Speed 5,000 cpm

Air-Actuated Hydraulic Nozzle with Flow up to 0.6 gpm and Rear Knob for Locking Clean-Out Needle in Place

Electrically-Actuated Hydraulic Nozzle with Flow up to 1.1 gpm, Max Speed 1,500 cpm and Max Pressure 2000 psi

Air-Actuated Air Atomizing Nozzle, Plate Mounted (Gun Only)

Air-Actuated Hydraulic Nozzle with Flow up to 0.6 gpm and Rear Knob for Locking Clean-Out Needle in Place, Lightweight Aluminum Body

Air-Actuated Air Atomizing Nozzle with Adjustable End Cap, Plate Mounted (Gun Only)

Air-Actuated Hydraulic Nozzle with Flow up to 0.6 gpm and Rear Knob for Locking Clean-Out Needle in Place and Recirculating Inlets

Air-Actuated Hydraulic Nozzle with Flow up to 0.6 gpm and Rear Knob for Locking Clean-Out Needle in Place, Extensions up to 36"

Air-Actuated Air Atomizing Nozzle with Metering End Cap, Plate Mounted (Gun Only)

Air-Actuated Air Atomizing Nozzle, Plate Mounted

Air-Actuated Air Atomizing Nozzle with Adjustable End Cap, Plate Mounted,

Air-Actuated Air Atomizing Nozzle with Metering End Cap, Plate Mounted

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet and Knurled Head Shut-Off Screw

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Single Air Inlet for Cylinder and Atomizing Air

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Sprays at 45° Angle from Nozzle Inlet Axis

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, for use with 1/4J Spray Set-Ups

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet and Extension up to 18"

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet and Extension, Sprays at 45° or 90° Angle from Nozzle Body

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Clean-Out Needle and Metering Knob

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Single Air Inlet for Cylinder and Atomizing Air, Sprays at 45° Angle from Nozzle Body

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Compact Block Design

Air-Actuated Air Atomizing Nozzle with 1/4" Inlet and Self-Contained Air Cylinder

Air-Actuated Air Atomizing Nozzle with 1/2" Inlet and Self-Contained Air Cylinder

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Variable Spray

Air-Actuated Air Atomizing Nozzle with 1/8" Inlet, Smallest Automatic Nozzle Available

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Compact design ideal where space is limited
* Flow rates up to 0.55 gpm (2.1 lpm)
* Drip Free™ set-ups provide complete shut-off
* Nickel-plated brass or stainless steel construction
* Sprays at a 45° angle from nozzle inlet axis

SprayFinder®

Model

Materials

Inlet Connection Type

Coating Automatic Nozzles