Antenna Type

Flow Exponent

Detergent Inlet Connection Size

Drop Size

Price Type

Outlet Connection Gender

Threaded nozzles are typically offered with tapered pipe threads. NPT and BSPT threads are the most common. Other thread types are available for selected nozzles.

Inlet Connection Thread Type

Nozzle Hub Drive

TankJet motor-driven tank cleaners are available with air or electric motors. Some electric motors are explosion-proof.

Motor Type

Formula

Cable Type

Air Cap Part Number

Drift Control

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Materials

Opening Pressure

Detergent Inlet Connection Gender

Maximum Liquid Discharge Pressure Range

Overflow Outlet Connection Gender

Weight

DSE Minimum Spray Angle

The range of flow (typically measured in gallons per minute or liters per minute) published in our catalog for a given nozzle. 
> _The catalog offers flow rates only for selected operating pressures so greater flow may be possible at pressures not shown in the catalog._

Liquid Flow Rate Range

Length At Maximum Opening Height

Fungicide Systemic

Finish Coating

DSE Calculation Model File Name

Number Of Trigger Signals

INRAE Drift Reduction Rating

Number Of Set-ups

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.
> _If drop size is critical to your application, contact us for specific information. For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Relative Drop Size Range

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Air Volume at Outlet

JKI Drift Reduction Rating

Model Type

Power Cable

Shutoff Type for Position 3

Side Spray Angle at Rated Pressure

Slot Size

Capacity At Maximum Pressure

Shutoff Type for Position 1

Minimum Tank Opening

The spray angles produced by nozzles vary from 0° for solid stream nozzles up to 180° for select hollow cone nozzles. For ease of product searching, our catalog groups spray angles into “narrow” (typically < 50°), “standard” (50°-100°) and “wide” (> 100°).
> _**Important Note:** Spray angle range for each of the basic spray patterns (flat spray, full cone, hollow cone) varies, so Spray Angle Catalog Group is most useful when searching for nozzles within a single spray pattern._

Spray Angle Catalog Code

Setup Type

Square Tubing

Liquid Flow Rate For Two Tips

Many hydraulic spray nozzles include a numeric capacity size in the part number. Capacity size is often related to the flow rate of the nozzle at the rated spray pressure for that nozzle. For example, the capacity size for a 1/4HH10 FullJet® nozzle is “10”, which reflects a 1.0 gpm flow rate at 10 psi.

Capacity Size

Steam Inlet Connection Gender

DSE Default Liquid Flow Rate

Nozzle Size

Herbicide Soil Applied

Connector Type

Self-cleaning products are design to eliminate the need for special cleaning tools. Some self-cleaning products allow full drainage of sprayed liquid without disassembly while others provide internal brushes or other methods for keeping the product clean

Is Self Cleaning

Clamp Sales Part Number

Fluid Cap Part Number

Compatible Needle Size

Tip Style Notes

Impact Group

Siphon Inlet Connection Gender

Descriptive Product Type

Maximum Flow

Nozzle Hub

O-Ring

Anti-Bearding Set-Up

Has Cleanout Needle

The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Standard hydraulic nozzles range in connection size from 1/8” threaded nozzles up to those with 12” flange connections. Larger connection sizes typically have larger flow rates but a wide variety of configurations are available to meet your application needs.

Inlet Connection Size

Gearbox Type

Number of PWM Cycles

Max Horizontal Throw For Straight Stream Spray Pattern

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

Herbicide Contact

Outlet Connection Size

Gear Ratio

Shutoff Type for Position 2

Turf Application

Core Number

Includes Harness

Liquid Discharge Flow Rate Range

Notes On Use With Controller

Total Spray Coverage Diameter

Effective Flow Field

Stator Type

Height

Fan Air Flow Rate

Discharge Outlet Connection Thread Type

B Dimension

Flow Diagram Caption Title

DSE Maximum Liquid Pressure

Air Cap Component

Manifold Size

Model

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.

The drop size ranges provided can be characterized as follows:
- 10 to 500 microns: very small drops
(comparable to fog)
- 100 to 500 microns: small drops
(comparable to light rain)
- 500 to 1000 microns: medium drops
(comparable to moderate rain)
- 1000 to 5000 microns: large drops
(comparable to heavy rain)

> _If drop size is critical to your application, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

> _For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Relative Drop Size Group

DSE Spread Parameter

End Cap Options

Max Horizontal Throw For Cone Spray Pattern

Material Composition

Cycle Time

Discharge Outlet Connection Gender

C Dimension

Maximum Free Passage

Trident™ Washdown Spray Gun

GunJet® Medium Pressure Spray Gun, Impact Resistant, Max Pressure 600 psi, Capacity 12 gpm

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi

GunJet® Medium Pressure Spray Gun, Max Pressure 250 psi,  For use with Adhesives

GunJet® Medium Pressure Spray Gun, Impact Resistant, Max Pressure 800 psi, Capacity 15 gpm

Medium Pressure Trigger Valve

We offer the _**“brand”**_ filter as a convenience because many Spraying Systems Co. nozzle brand names are recognized by customers around the world, such as VeeJet® flat spray nozzles and FullJet® full cone nozzles. Most of our nozzle brands are registered trademarks in the United States and in other countries around the world.

Brand

Width

Overall length of the part (typically measured in inches or millimeters).

Length

Trigger Position

GunJet spray guns and accessories are available with various outlets, including NPT or BSPT threaded outlets, UniJet threaded outlets (11/16-16) and quick-connect outlets.

Outlet Connection Type

GunJet spray guns are available for a wide range of operating pressures. The maximum operating pressure for any Low Pressure GunJet spray gun is 250 psi (17 bar). The maximum operating pressure for any Medium Pressure GunJet spray gun is 1000 psi (69 bar). The maximum operating pressure for any High Pressure GunJet spray gun is 4000 psi (275 bar). Be sure to check the specifications for each GunJet spray gun carefully and follow all safety guidelines.

Pressure Group

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Max. operating pressure: 1000 psi (69 bar)
* Max. temperature: 200°F (93°C)
* Capacity: 5 gpm (19 lpm)
* Material: Nickel-plated steel valve body with aluminum handle (23H-SS features stainless steel inlet body and tip retainer)
* Trigger guard
* Four finger trigger for ease of operation

GunJet® Medium Pressure Spray Gun, Max Pressure 1000 psi

Medium pressure GunJet® spray guns offer flow capacities ranging from 5 gpm (19 lpm) to 15 gpm (57 lpm) and maximum operating pressures ranging from 250 psi (17 bar) to 1000 psi (69 bar). Sturdy design and materials ensure long, productive equipment life. A complete line of accessories, including extensions, adapters and swivel connectors are available.

Medium Pressure

GunJet® Medium Pressure Spray Gun, Max Pressure 1000 psi, AA23H

Model Specifications

Product Type

General Information

Description

Specification Summary

Downloads

Documents

Alternative Models