The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Liquid Pressure

Specific gravity is the ratio of the density of a fluid compared to the density of water. It must be considered to properly calculate flow rate. 

 **Alternatively**, if you don't know the specific gravity you may select the **Liquid Type** from a list of commonly-sprayed liquids and temperatures.

### Liquid Type

 The type of liquid sprayed and its temperature affects the specific gravity of the liquid and in turn affects the flow rate. The default liquid is water, with a specific gravity of 1. 

> _For more information on how specific gravity and other characteristics such as temperature, viscosity and surface tension affect spray performance, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Specific Gravity

The angle of the spray pattern as it emerges from the nozzle orifice, measured in degrees. Narrower spray angles provide less coverage of the sprayed surface. Wider spray angles provide greater coverage of the sprayed surface. Solid stream nozzles have a 0° spray angle.
> _For more information on spray performance characteristics including spray angle and spray coverage, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Spray Angle

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-us-en-product-facets')/$metadata#docs(*)

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

WashJet® High Impact Nozzles - Quick-Connect Spray Tips - MEG/WEG

High impact WashJet® nozzles are ideal for pressure washing and car washing applications. Threaded and quick-connect WashJet nozzles operate at pressures up to 4000 psi (275 bar) and are available in a wide variety of spray angles and flow rates. Ultra-high-pressure nozzles are also available, with operating pressures up to 60,000 psi (4000 bar).

High Pressure Flat Spray Nozzles

* High-impact sprays and high pressure operation ensure optimal cleaning – ideal for pressure washing* Optimized design with internal guide vane improves fluid dynamics to minimize turbulence and clean better than generic pressure wash nozzles (see demo video above)* Longer wear life and flow control accuracy with specially hardened 404 series stainless steel construction* Operating pressures from 40 to 3000 psi* Uniform spray distribution from 0.2 to 1.7 gpm by using internal guide vane to stabilize liquid turbulence* Spray angle is 0° (solid stream)* 1/4 in Male NPT inlet connection

SprayFinder®

Operating Conditions

High Pressure Flat Spray Nozzles for WashJet® Nozzle, Hardened Stainless Steel