Name: UniJet® Split-Eyelet Nozzle Body, 316 Stainless Steel
SKU: 7421-316SS-3/4T-316SS

Configuration

Standard Feature

Weight

Diameter

Width

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Material Composition

Overall length of the part (typically measured in inches or millimeters).

Length

The QuickJet® and UniJet® Nozzle Systems provide nozzle bodies with interchangeable spray tips. QuickJet bodies and tips are designated with “Q” as the first letter in the part number and offer quick-connect convenience with automatic spray pattern alignment. UniJet bodies and tips use a threaded retaining cap to complete the assembly. Both QuickJet and UniJet nozzles are available in a wide variety of spray patterns, flow rates and materials of construction.

Body Type

Pipe Size

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

UniJet® Split-Eyelet Nozzle Body

* A quick and easy way to connect UniJet® spray nozzles to piping systems
    * Drill a hole in side of pipe
    * Place inlet of split eyelet into the hole – the seal eliminates leaking
    * Assemble the clamp component to secure the assembly to the pipe
* Maximum pressure: up to 250 psi (17 bar)
* Maximum flow rate: 3 gpm (11.4 lpm)

UniJet® Split-Eyelet Nozzle Body, 316 Stainless Steel

Split-eyelet connectors provide a quick and easy way to connect spray nozzles to piping systems.

UniJet® Split-Eyelet Nozzle Body, 316 Stainless Steel, 7421-316SS-3/4T-316SS

General Information

Description

Specification Summary

Product Downloads

Documents

Specifications

Configuration

Standard Feature