FullJet® Nozzle, Cast, 316 Stainless Steel, B2-1/2H-SS950SQ
Images are representative.
Images are representative. Products may differ in material or configuration.
Product Configuration
Inlet Connection Thread Type:BSPT
Inlet Connection Type:Threaded (Female BSPT)
Material Composition:316 Stainless Steel
This product has a BSPT (British Standard Pipe Thread) connection. BSPT is not the standard thread type in North America — most US and Canadian installations use NPT (National Pipe Thread). If you're unsure, please verify your thread type before ordering.
General Information
Description
- Cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones
- Unique vane design and large flow passages provide superior spray pattern control
- Uniform spray distribution from .26 to 1977 gpm (1.1 to 7371 lpm)
- Operating pressures up to 150 psi (10 bar)
- Spray angles: Standard – 43° to 94°, Wide – 112° to 120°
Flow
Square spray As the liquid enters the nozzle, it flows over and through the vane. This creates the initial swirling of the liquid. The design of the nozzle ensures the liquid continues to swirl after passing through the vane. As the liquid exits the orifice, it interacts with cross cuts located on the face of the nozzle and forms a square spray pattern.
Specification Summary
Inlet Connection Gender
Female
Inlet Connection Size
2-1/2 in
Inlet Connection Thread Type
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Liquid Flow Rate Range
69 - 330 gpm
Liquid Pressure Range
5 - 150 psi
Material Composition
316 Stainless Steel
Relative Drop Size Range
1,000 - 5,000 µm
Spray Pattern
Square Spray
Product Type
Nozzle
Product Downloads
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
950SQ
Inlet Connection Gender
Female
Inlet Connection Size
2-1/2 in
Inlet Connection Thread Type
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Liquid Flow Rate at Rated Pressure
95 gpm @ 10 psi
Model
H-SQ
Design Feature
Has Guide Vane, Is Cast
Product Type
Nozzle
Drop Sizes
Relative Drop Size Group
1,000 - 5,000 µm (Heavy Rain)
Materials
Material Code
SS
Material Composition
316 Stainless Steel
Performance
Spray Angle Range
76 - 84°
Spray Angle
76° @ 80 psi, 81° @ 7 psi, 84° @ 20 psi
Product Category
Brand
FullJet®
Spray Angle Catalog Code
Standard
Standard Feature
Body Hex Size
3-1/8 in
Equivalent Orifice Diameter
1.12 in
Length
6.16 in
Liquid Flow Rate Range
69 - 330 gpm
Liquid Pressure Range
5 - 150 psi
Maximum Free Passage Diameter
0.688 in
Rated Pressure
10 psi
Relative Drop Size Range
1,000 - 5,000 µm
Spray Pattern
Square Spray
Weight
80.5 oz