WhirlJet® Nozzle, Brass, B3CRC-120-45
Product Configuration
Inlet Connection Thread Type:BSPT
Inlet Connection Type:Threaded (Female BSPT)
Material Composition:Brass
General Information
Description
- Hollow cone spray pattern with a circular impact area
- Large, unobstructed flow passages minimize clogging
- Good atomization of liquids at lower pressures – ideal for fluid cooling applications
- Removable caps for easy inspection and cleaning on some models
- Slope-bottom design models reduce the drilling effect of the fluid vortex in the fluid chamber and premature wear
- AX and BX nozzles form smaller drops; ideal for use in air washers and dust suppression applications
- CX, CF, CRC and D nozzles feature higher flow rates; ideal for use in larger, evaporative cooling spray ponds
- AP, LAP and LBP nozzles are constructed of polypropylene and feature excellent corrosion resistance at temperatures up to 160°F (71°C); patented center post design provides extended wear life of the nozzle
- Standard, wide and extra wide spray angles
Flow
As liquid enters the nozzle, it passes into a whirlchamber and begins to spin in a circle at high speed. The rotation forces the liquid away from the center toward the edges of the whirlchamber. This causes the liquid to exit the orifice in a hollow cone pattern. Some WhirlJet nozzles have a slope bottom in the whirlchamber that helps extend wear life.
Specification Summary
Inlet Connection Gender
Female
Female
Inlet Connection Size
3 in
3 in
Inlet Connection Thread Type
BSPT
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Threaded (Female BSPT)
Liquid Flow Rate Range
79 - 454 gpm
292 - 1,730 l/min
Liquid Pressure Range
3 - 100 psi
0.2 - 6 bar
Relative Drop Size Range
1,000 - 5,000 µm
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Product Type
Nozzle
Nozzle
Product Downloads
Documents
Other
There was an error downloading your file
There was an error downloading your file
There was an error downloading your file
Product Performance
Liquid Flow Rate
Spray Angle
Specifications
Configuration
Capacity Size
120-45
120-45
Inlet Connection Gender
Female
Female
Inlet Connection Size
3 in
3 in
Inlet Connection Thread Type
BSPT
BSPT
Inlet Connection Type
Threaded (Female BSPT)
Threaded (Female BSPT)
Liquid Flow Rate at Rated Pressure
120 gpm
454.249 l/min
Material Composition
Brass
Brass
Model
CRC
CRC
Spray Angle at Rated Pressure
45°
45°
Product Type
Nozzle
Nozzle
Design Feature
Is cast, Two-piece cast-type
Is cast, Two-piece cast-type
Drop Sizes
Relative Drop Size Group
1,000 - 5,000 µm (Heavy Rain)
1,000 - 5,000 µm (Heavy Rain)
Performance
Spray Angle Range
45 - 50°
45 - 50°
Spray Angle
45° @ 7 psi, 48° @ 20 psi, 50° @ 80 psi
45° @ 0.5 bar, 48° @ 1.5 bar, 50° @ 4 bar
Physical
Inlet Centerline To Spray Orifice Height
5.938 in
15.083 cm
Inlet Diameter Nominal
2.25 in
5.715 cm
Inlet To Spray Orifice Length
4.438 in
11.273 cm
Spray Centerline Offset From Inlet Centerline
1.125 in
2.858 cm
Product Category
Brand
WhirlJet®
WhirlJet®
Spray Angle Catalog Code
Standard
Standard
Standard Feature
Equivalent Orifice Diameter
2.016 in
51.206 mm
Height
8.406 in
21.351 cm
Length
6.938 in
17.623 cm
Liquid Flow Rate Range
79 - 454 gpm
292 - 1,730 l/min
Liquid Pressure Range
3 - 100 psi
0.2 - 6 bar
Rated Pressure
7 psi
0.483 bar
Relative Drop Size Range
1,000 - 5,000 µm
1,000 - 5,000 µm
Spray Pattern
Hollow Cone
Hollow Cone
Weight
19 lbs
8.62 kg