TankJet® Nozzle, TJ360-3-600-C13-E2
+ 9
Product Configuration
Gearbox Bearings:Rulon LR
Gearbox Type:Flow-Thru
Gear Ratio:655:1
Inlet Stem:2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Nozzle Count:3
Nozzle Hub Drive:Clutch
Nozzle Size:.313
O-Ring Type:Etylene Propylene
Stator Type:Standard
General Information
Description
This high-impact unit cleans hard-to-remove residues with great efficiency. It's ideal for blenders, breweries, food processing, petrochemical, pulp storage, processing, tanker trucks and wineries.
- Provides consistent, high-impact, high-efficiency cleaning over the entire pressure range for short cycle times.
- Can be used for two types of cleaning: high-concentration chemical recirculation cleaning and low-pressure, high-volume cleaning.
- Choice of dual- or triple-nozzle fluid-driven hubs in food-grade, oil-lubricated or flow-through gearbox designs.
- Nozzles rotate 360° in horizontal and vertical planes, creating a crisscrossing pattern to thoroughly clean tanks and remove the stickiest of residues.
- All units are built-to-order, lightweight for easy portability and compact to fit in small tank openings.
- Standard clutch version permits easy nozzle hub rotation by hand for insertion and removal from tank; optional pin version for permanent or CIP installations; optional external, self-rinsing nozzles are available for both pin and clutch versions.
- Built-in strainer minimizes clogging and extends wear life; user-serviceable for easy maintenance.
Specification Summary
Impact Group
High Impact
High Impact
Inlet Connection Size
2 in
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Threaded (Female NPT) + Quick-Disconnect (Male)
Liquid Flow Rate Range
30 - 300 gpm
114 - 1,136 l/min
Material Composition
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Maximum Recommended Tank Diameter
Up to 100 ft
Up to 30.5 m
Maximum Temperature
250 °F
121 °C
Nozzle Count
3
3
Operating Principle
Fluid-driven Turbine
Fluid-driven Turbine
Product Type
Nozzle
Nozzle
Spray Coverage
360°
360°
Product Downloads
Documents
Other
There was an error downloading your file
There was an error downloading your file
There was an error downloading your file
Specifications
Configuration
Gear Ratio
655:1
655:1
Gearbox Bearings
Rulon LR
Rulon LR
Gearbox Type
Flow-Thru
Flow-Thru
Inlet Connection Size
2 in
2 in
Inlet Connection Type
Threaded (Female NPT) + Quick-Disconnect (Male)
Threaded (Female NPT) + Quick-Disconnect (Male)
Inlet Stem
2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
2.5 in. Quick-Disconnect (Male) and 2 in. NPT (Female)
Material Composition
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Gears – 17-4PH stainless steel, Gear shaft bearing system – PTFE or oilite bearing, O-rings – self-lubricating EPDM or Viton®, Seals – high-performance spring-energized PTFE , All other metallurgy – 316 stainless steel
Model
TJ360
TJ360
Nozzle Count
3
3
Nozzle Hub Drive
Clutch
Clutch
Nozzle Size
.313
.313
O-Ring Type
Etylene Propylene
Etylene Propylene
Product Type
Nozzle
Nozzle
Stator Type
Standard
Standard
Performance
Operating Pressure Range
40 - 350 psi
2.8 - 24.1 bar
Product Category
Brand
TankJet®
TankJet®
Impact Group
High Impact
High Impact
Standard Feature
Hub Connection Type
3 nozzle hub
3 nozzle hub
Liquid Flow Rate Range
30 - 300 gpm
114 - 1,136 l/min
Maximum Free Passage
840 µm
840 µm
Maximum Recommended Tank Diameter
Up to 100 ft
Up to 30.5 m
Maximum Temperature
250 °F
121 °C
Minimum Tank Opening
10.25 in
260 mm
Operating Principle
Fluid-driven Turbine
Fluid-driven Turbine
Recommended Strainer Mesh
20
20
Spray Coverage
360°
360°
Tank Mounting Options
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward
Vertical/Downward, Vertical/Upward, Horizontal, 45° Upward, 45° Downward