Spraying Systems Company Logo

UniJet® High Pressure Nozzle, Hardened Stainless Steel, TP6504EG

Model:

General Information

Description

  • Designed for operations requiring higher impact
  • Save on nozzle replacement costs – bodies can be reused, only spray tips are replaced
  • Design allows easy tip change out – remove tips by unscrewing the retainer cap
  • Flat spray nozzles provide an even edge fan type spray pattern
  • Spray angles from 0° to 65°
  • Uniform spray distribution across the entire spray pattern and flow rates from .41 to 17.3 gpm (1.5 to 64 lpm)
  • Operating pressures from 300 to 3000 psi (20 to 200 bar) –higher than standard tips
  • Body assembly consists of high pressure nozzle body, strainer, tip gasket and high pressure tip retainer

Flow

As the liquid exits through the rounded U shape of the orifice, it forms into a flat spray pattern. The distribution is even at pressures above 300 psi (20 bar).

Specification Summary

Inlet Connection Type
Quick-connect
Liquid Flow Rate Range
0.4 - 3.5 gpm
Liquid Pressure Range
40 - 3,000 psi
Material Composition
Hardened Stainless Steel
Relative Drop Size Range
500 - 1,000 µm
Spray Pattern
Flat Spray
Product Type
Tip

Product Downloads

Documents

Product Performance

Liquid Flow Rate

Specifications

Configuration

Capacity Size
04
Inlet Connection Type
Quick-connect
Liquid Flow Rate at Rated Pressure
0.4 gpm
Material Composition
Hardened Stainless Steel
Model
EG
Spray Angle at Rated Pressure
65°
Tip Type
EG
Strainer Screen Mesh Size
50
Product Type
Tip

Drop Sizes

Relative Drop Size Group
500 - 1,000 µm (Moderate Rain)

Performance

Spray Angle
65° @ 40 psi
Spray Angle Range
65 - 65°

Product Category

Brand
UniJet®
Spray Angle Catalog Code
Standard
Pressure Group
High Pressure

Standard Feature

Liquid Flow Rate Range
0.4 - 3.5 gpm
Liquid Pressure Range
40 - 3,000 psi
Rated Pressure
40 psi
Relative Drop Size Range
500 - 1,000 µm
Spray Pattern
Flat Spray

Recommended Accessories